Abstract:Stretch bending is commonly used in the fabrication of profile-based shapes. However, one of the challenges in many bending-type forming processes is controlling springback upon unloading. Springback appears sensitive to upstream and in-process parameters, making prediction and control difficult. The springback problem is particularly important in forming processes where stringent springback control strategies are needed to assure product dimension, process flexibility and overall equipment effectiveness. In this research, we present an analytical framework for springback assessment in a stretching-controlled, flexible bending process. A new, flexible rotary stretch bending machine is designed and built, allowing the manufacture of complex-shape profiles with varying curvatures, including straight portions, with low tool investments. Furthermore, a Full Moment (FM) analytical model is developed for springback assessment. The modeling strategy employs a full moment distribution along the entire profile upon bending, introducing a stretching-controlled moment transition between different curvature portions such that the springback contribution of the plastic moment outside the theoretically bent portions is considered. Additionally, the influential factors related to material, geometry and process, including the applied stretching strains, are comprehensively considered. In this way, the modeling strategy enables accurately evaluation of springback for complex-shape parts in stretching-controlled forming processes. Moreover, the proposed forming process is validated by a series of experiments conducted for a wide range of stretching levels using rectangular hollow aluminum alloy profiles. This forming strategy demonstrates high capability for controlling springback and dimensional accuracy. By comparing experiments, numerical simulations and analytical calculations, this proves that the developed FM model provides accurate and efficient assessment of springback. The average relative error provided by the FM model is 2.2%, as compared to 10.5% for a classical method used for comparison. Using the analytical model combined with numerical simulation, the crucial deformation characteristics, including stretching-dependent evolution of strain transition, are revealed. Overall, the FM analytical strategy has proven its capability as an effective tool, which can make springback knowledge more explicit, generic and reuseable for stretching-controlled bending processes.

Implicit elastoplastic finite element analysis of tube-bending with an emphasis on springback prediction

Springback Angle and Plastic Elongation Prediction of Thin-Walled Tube Bending by FEM

Springback after the Lateral Bending of T-Section Rails of Work-Hardening Materials

Two-dimensional Bending Springback Analysis and Test of T-rail

Effects of Process Parameters on Springback of High Strength 21-6-9 Tube Bending Considering Variation of Elastic Modulus

Spiral Metal Tube Multi-Roller Bending Springback Prediction Model Based on Dynamic Deformation Enhancement Analysis

Springback prediction of titanium tube bending considering Bauschinger effect and Young's modulus variation

Springback Prediction Model Considering the Variable Young’s Modulus for the Bending Rectangular 3A21 Tube

Sensitivity analysis for springback of QSTE700 high-strength steel rectangular welded tube to material parameters in rotary draw bending

A Method of Constitutive Experiment for Accurate Description of Tube Performance under Rotary-Draw Bending

Springback law of high-strength 21-6-9 stainless steel tube in numerical control bending under different process parameters

Springback analysis of rotary bending considering strain paths

Prediction of spring-back and side-wall curl in 2-D draw bending

Spatial variable curvature metallic tube bending springback numerical approximation prediction and compensation method considering cross-section distortion defect

Springback Prediction Model and Its Compensation Method for the Variable Curvature Metal Tube Bending Forming

Springback angle prediction of circular metal tube considering the interference of cross-sectional distortion in mandrel-less rotary draw bending

Research on the axial elongation and springback law of thick-walled tubes in cold bending forming

Spring-Back Prediction of the Bi-Layered Metallic Tube under CNC Bending Considering Neutral Layer Shifting Extraction

The behaviour of thin-walled, aluminium alloy profiles in rotary draw bending—A comparison between numerical and experimental results

Analytical springback assessment in flexible stretch bending of complex shapes

Springback Analysis for Warm Bending of Titanium Tube Based on Coupled Thermal-Mechanical Simulation