Abstract:Steam gasification experiments were conducted with coal and petcoke in conjunction with potentially renewable biomass substances, namely coconut shell, coconut husk, and banana peduncle, which are usually considered waste materials. The gasification performance in a bench-scale externally heated fluidized bed gasifier was evaluated based on the product syngas quality and the detailed characterization of feed and product samples using X-ray fluorescence (XRF), thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy analysis. This work performed experiments at relatively constant operating parameters: solid feed rate, steam/O2 ratio, feed particle size, and gasification reactor temperature. Biomass waste resources showed an augmentation in the syngas product quality for both the coal and petcoke samples, especially in cold gas efficiency (CGE) and carbon conversion efficiency (CCE). A maximum increase in CCE from 44.3 % to 72 % for the coal sample and from 19.3 % to 36.0 % for the petcoke sample was witnessed, whereas for the CGE, a rise of 35.8 %–91.7 % for the coal and 44.3 %–59.8 % for the petcoke with 80/20 blended biomass waste samples, was observed compared to the coal and petcoke only samples. The maximum hydrogen product gas yield between 53 and 73.7 vol % and combustible gas yields between 62.2 and 86.7 vol % were obtained on a nitrogen gas-free basis during the experiments. The solid residues of different gasification experiments were characterized and analyzed by scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX) and field emission-scanning electron microscopy (FE-SEM) analytical techniques to elucidate the high yield of energy-intensive gases. FTIR analysis was performed on all the liquid product samples obtained during the gasification experiments. The presence of alkali and alkaline earth metals (AAEMs) in biomass wastes highlighted the catalytic effect of these elements during the gasification experiments. The current work provides an opportunity to reduce carbon footprints with effective and efficient utilization of conventional energy feedstocks in conjunction with other waste substrates.

Energy Recovery from Solid Waste Materials via a Two-step Gasification Process by Steam

Energy Recovery from Municipal Solid Waste through Co-Gasification Using Steam or Carbon Dioxide with Olive By-Products

Solid Waste as a Renewable Source of Energy: A Comparative Study on Thermal and Kinetic Behavior of Three Organic Solid Wastes

Thermal analysis technology to utilize waste biomass and waste heat to produce high-quality combustible gas through simulations and experiments

Potential of products from high-temperature pyrolysis of biomass and refuse-derived fuel pellets

TGA Pyrolysis and Gasification of Combustible Municipal Solid Waste

A Two-Step Process For Energy-Efficient Conversion Of Food Waste Via Supercritical Water Gasification: Process Design, Products Analysis, And Electricity Evaluation

Pyrolysis of wastewater sludge and composted organic fines from municipal solid waste: laboratory reactor characterisation and product distribution

Two-Stage Dry Reforming Process for Biomass Gasification: Product Characteristics and Energy Analysis

Syngas Composition: Gasification of Wood Pellet with Water Steam through a Reactor with Continuous Biomass Feed System

Pyrolysis of Specific Non-Recyclable Waste Materials: Energy Recovery and Detailed Product Characteristics

Integration of Biomass/steam Gasification with Heat Recovery from Hot Slags: Thermodynamic Characteristics

Valorization of coconut and banana wastes with petcoke and coal via steam gasification in a fluidized bed reactor

Assessment of biochar developed via torrefaction of food waste as feedstock for steam gasification to produce hydrogen rich gas

A Comparative Analysis of Waste Biomass Pyrolysis in Py-GC-MS and Fixed-Bed Reactors

Two-stage thermal pyrolysis of plastic solid waste: Set-up and operative conditions investigation for gaseous fuel production

Energy and Exergy Analyses of Fluidized-Bed Municipal Solid Waste Air Gasification

Pyrolitic Methods of the Thermal Processing of Solid Municipal Waste

Gasification of organic solid waste for syngas: Physicochemical and conversion mechanism investigation

Towards the Production of High Added-Value Products from the Pyrolysis and Steam Pyro-Gasification of Five Biomass-Based Building Insulation Materials at End-of-Life

Kinetics of Gaseous Species Formation During Steam Gasification of Municipal Solid Waste in a Fixed Bed Reactor