Abstract:In this study, ternary Al-12Si-0.6Mg material was manufactured by gravity die casting method in induction melting furnace. Microstructure images of alloy were taken on optical microscope after T6 heat treatment. Hardness, yield and tensile strength and breaking elongation of as-cast and heat-treated materials were measured by universal methods. CNC lathe was used for cutting tests and dynamometer was used to measure cutting force. Cutting tests were performed by using different cutting speeds-CS (450-500-550 m/min), feed rates-FR (0.05–0.15-0.25 mm/rev) and constant depth of cut-DOC (1.5 mm). Uncoated (A), CVD-TiCN + TiN (B) and PVD-TiAlN+TiN (C) coated carbide inserts were selected as a cutting tool. In the microstructural observations, it was determined that the structure of the material made up of aluminum rich α, primary and eutectic silicon, δ (Al4FeSi2) and π (Al8Mg3FeSi6) phases. The heat treatment refined the phases in the structure of the alloy. In addition, it has been determined that it improves mechanical properties (hardness, yield and tensile strength) by spheroidizing silicon particles. As a result of the cutting tests, it was detected that the cutting force (CF) reduced with T6 heat treatment at all CS and FR values. The CF, BUE (Built up edge) and BUL (Built up layer) heightened with increasing FR, while it reduced with increasing CS on all cutting tools. CF, BUE and BUL were formed at least in tools A, B and C, respectively. While continuous chip formation was detected in the as-cast part, brittle chip formation was observed in the heat-treated part due to the reduction in breaking elongation of the material.

Effect of T6I6 treatment on dynamic mechanical behaviour of Al-Si-Mg-Cu cast alloy and impact resistance of its cast motor shell

The effect of T4 and T6 heat treatments for dynamic impact behavior of casting Mg-Gd-based alloys

Effects of T6 heat treatment with residual heat of casting on microstructure and mechanical properties of 319 aluminium alloy castings

Effect of short T6 heat treatment on the microstructure and the mechanical properties of newly developed die-cast Al–Si–Mg–Mn alloys

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

The Influence of T6 Treatment on Fracture Behavior of Hypereutectic Al-Si HPDC Casting Alloy

Influence of Y Content and T6 Heat Treatment on the Organization and Mechanical Properties of Cast A356 Aluminum Alloy

Effect of heat treatment on microstructure and tensile properties of 319 aluminum alloy

Effect of chemical composition and T6 heat treatment on microstructure and mechanical properties of a hyper eutectic Al–Si alloy

Evolution of microstructure, mechanical properties and corrosion behavior of Al-4Mg-2Zn-0.3Ag (wt.%) alloy processed by T6 or thermomechanical treatment

Effect of T6 heat treatment on microstructure and mechanical properties of large-weight aluminum alloy flywheel housing parts formed by local-loading squeeze casting

Enhanced Strengthening and Toughening of T6-Treated 7046 Aluminum Alloy through Severe Plastic Deformation

Effect of T6 heat treatment on microstructure and mechanical properties of Al–18Si–10Cu–10Ni–5Mn–5Mg alloy prepared by laser-directed energy deposition

Processing of T6 heat-treated Al-12Si-0.6Mg alloy

Investigation of Microstructures and Mechanical Properties of SiC/AA2024 Nanocomposites Processed by Powder Metallurgy and T6 Heat Treatment

Effect of Final Thermomechanical Treatment on the Mechanical Properties and Microstructure of T Phase Hardened Al-5.8Mg-4.5Zn-0.5Cu Alloy

Effect of heat treatment on the microstructure and mechanical properties of Al‐9Si‐0.4Mg‐0.1Cu alloy

Microstructure, Tensile Properties and Fractography of A356 Alloy under As-Cast and T6 Obtained with Expendable Pattern Shell Casting Process

Effect of Novel Thermomechanical Treatment on Microstructure and Properties of 6156 Alloy

Effects of heat treatment and testing temperature on the tensile properties of Al–Cu and Al–Cu–Si based alloys

Evolution of precipitation and mechanical properties of high-pressure vacuum die- cast AlSi10MgMn alloy in T5 and T6 heat treated states