Abstract:Purpose: The aim of this study was to develop a methodology, based on profilometer measurements to assess the optical behaviour of Intraocular Lenses (IOls). The "Modulation Transfer Function through-object" (MTF through-object) based on vergence object displacement was calculated for different pupil sizes and pseudophakic eyes. Tilt and decentration were also analysed in a realistic cornea eye model. Methods: For comparison between the different IOLs, an optical quality criterion based on a minimum value the MTF through-object and the recognition of simulated vision optotypes was introduced. Five IOLs were used in this study: Tecnis Eyhance, Mini Well, Tecnis Symfony, Tecnis Synergy and RayOne EMV. Results: The technique was validated with previous methodologies. A general narrowing of the through-object MTF curve compared to the through-focus MTF curve was shown, resulting in greater distances between near and intermediate points and less depth of field around the far peak. The comparison between the IOLs showed that variations in corneal aberrations, pupil size and decentration caused relevant changes in IOL performance. A decrease of the SA produced a hypermetropic shift of the far focus between + 0.3 D and + 0.4 D. Most of IOLs worsen the optical quality as pupil size increased, even the MTF through-object shape changed. Decentration was an important factor in IOL implantation, causing a significant change in MTF through-object shape in most of IOLs. Conclusions: This study highlights the need to evaluate pre-operative patients for corneal aberrations and pupillary size to have the best optical success after cataract surgery in multifocal or extended depth of focus IOLs. Key messages: What is known MTF(Modulation Transfer Function) through-focus curves (calculated in image space by moving the detector plane) can be obtained from optical bench assembly or from commercial devices. Recently, some studies proposed to characterize the lens surface design based on the profilometric measurements What is new A novel methodology based on profilometer measurements to assess the optical behaviour of Intraocular Lenses (IOls) was shown. The "Modulation Transfer Function through-object" based on vergence object displacement was introduced in order to analyse five premium IOLs. MTF through-object curve is more appropriate for studying clinical behaviour, as it provides further near and intermediate points distances and lower depth of focus around far peak compare to MTF through-focus curves. The optical behaviour of the five IOLs can vary considerably depending on the eye model and pupil size. The effect of tilt and decentration on the MTF through-object the IOLs was analysed.

Luminance of Projection Focimeter Target with Oblique Viewing

Compact Design of Projection Lens for 3D Profilometry Based on Interferometric Fringes

118 Long Focal Length Testing for Large Aperture Lens

Focal Length Measurement Method for Lenses with Small Aperture and Long Focal Length

Novel Method for Testing the Long Focal Length Lens of Large Aperture

Assessment of the performance of automated focimeters in the measurement of single vision spectacle lenses

Contour mapping of spectacle lenses

Large-aperture automatic focimeter for the measurement of optical power and other optical characteristics of ophthalmic lenses.

Focimeter measurement of the astigmatism arising from oblique central refraction

A SCANNING FOCIMETER TO MEASURE PERIPHERAL LENS POWERS

Intra-Observer and Inter-Observer Variability of Intraocular Lens Measurements Using an Interferometry Metrology Device

Measurement System of Projection Lens Based on CCD Modulation Transfer Function

Real-time MTF Measurement System for Projection Lens

Comparison of the optical behaviour of five different multifocal diffractive intraocular lenses in a model eye

Optical Target Projector: Principle of Functioning and Basic Performance Test

Comparison of Four Methods for Measuring Heterophoria and Accommodative Convergence over Accommodation Ratio

Inter-laboratory reproducibility of power measurement of toric hydrogel lenses using the focimeter and the Moiré deflectometer

Analysis of the optical performance of intraocular lenses using profilometric measurements

A comparison of optical biometers used in children for myopia control

Pupil size measurements with a multifunctional aberrometer/coherence interferometer/tomographer and two infrared based pupillometers

Verification of the vertex powers of varifocal rigid contact lenses