Abstract:There is an urgent need in surface mount technology (SMT) for a nontoxic, reusable and low temperature bonding technique which can afford good mechanical support as well as electrical contact. Meanwhile in the nanotechnology, many excellent and unique structure-related properties such as the high mechanical strength, the high conductivity and the adhesion ability of gecko feet have been studied. Our lab proposes a new patterned structure of Au nanowire array named nanowire surface fastener (NSF), which cold bonding for surface mount technology can be realized at room temperature. Then various methods have been developed to fabricate nanowire, such as arc discharge, catalytic CVD growth and template synthesis, and so on. Among these methods, the template method has been widely used for preparing one-dimensional nanostructures such as metals, semiconductors, polymers, and other materials by electrochemical, electroless deposition or sol-gel technique. Especially anodic aluminum oxide template assisted way has attached considerable attention due to its unique structure properties, such as controllable pore diameter, extremely narrow pore size distribution with high densities, high aspect ratios, and ideally cylindrical pore shape. The well arranged porous anodic aluminum oxide membrane is fabricated from aluminum film by two steps zM oxalic acid electrolytes. The anodic aluminum oxide membrane was investigated for features such as pore size, interpore distance, and thickness by 40 V. It is important for fabrication of porous anodic aluminum oxide template to find out elimination of the barrier layer of oxide and the pore extending rate by 0.5 M phosphoric acid. Morphologies of surface of aluminum film between anodization process and the anodic aluminum oxide barrier layer was researched by using atomic force microscope and scanning electron microscope. Results showed that the anodic aluminum oxide having the same diameter of the pore and the well arranged pore array without branching channel was obtained. The diameter of the pore before the pore extending treatment is 42 nm and the diameter of the pore after the pore extending treatment for 30 minutes is 86 nm. It was found that the diameter of the pore increased per 15 nm by the pore extending treatment for 10 minutes. We fabricated the through-hole anodic aluminum oxide template and made Cu nanowire by the template of our own making. By using Cu nanowire, we try to produce nanowire surface fastener and evaluate its properties.

Formation of Alumina Nanotubes and Jet Effect during High‐Voltage Local Anodization of Aluminum

Structural and Hydrophilic Properties of Nanoporous Aluminium Oxide Film as a Function of Voltage Anodization

Microstructure and topography of laterally confined porous anodic oxides produced with high growth rate in a maskless two-phase jet setup

Fast fabrication of small pore anodic titania nanotube arrays under high voltage

Fabrication of Alumina Nanowires via Anodic Oxidation of Aluminum

Zinc Aluminate Nanotubes Fabrication Based on Heating-Induced Volatilization and Kirkendall Effect in Nanopores of Anodic Aluminum Oxide Template

Fabrication of Anodic Aluminum Oxide Template and Cu Nanowire Surface Fastener

Formation of Anodic Aluminum Oxide with Serrated Nanochannels.

Simultaneous Fabrication of Open-Ended Porous Membrane and Microtube Array in One-Step Anodization of Aluminum

Formation and Microstructures of Unique Nanoporous Aao Films Fabricated by High Voltage Anodization

Anodic Layer Growth on 1050 and 2024 Aluminium Alloys in Presence of Etidronic Acid : Changes in Morphology and Structure

Effect of the anodization voltage on the porewidening rate of nanoporous anodic alumina

Formation of an Array of Isolated Alumina Nanotubes

Formation of Nanoporous Mixed Aluminum-Iron Oxides by Self-Organized Anodizing of FeAl3 Intermetallic Alloy

Control of the Nanopore Architecture of Anodic Alumina via Stepwise Anodization with Voltage Modulation and Pore Widening

Voltage oscillations during anodizing process of aluminum and their suppression

Growth of Alumina Oxide Nanowires in an Aluminum Anodization Process

Fabrication of Crystallized Porous Anodic Aluminum Oxide under Ultra-High Anodization Voltage

Fabrication of highly ordered nanoporous alumina films by stable high-field anodization

Penetrating the oxide barrier in situ and separating freestanding porous anodic alumina films in one step.

Facile Fabrication of Anodic Alumina Rod-Capped Nanopore Films with Condensate Microdrop Self-Propelling Function.