Abstract:REBCO coated conductors are exposed to rotating magnetic fields in various high-temperature super conducting (HTS) applications, such as HTS rotating machines and flux pumps. AC loss will begenerated in the conductors when they carry AC current under rotating magnetic fields. We define AC loss in the coated conductors with and without current as total AC loss and magnetization loss, respectively. In this work, total AC loss and magnetization loss, in a REBCO tape under rotating magnetic fields and a perpendicular AC standing wave magnetic field are numerically investigated. We employ a 2D finiteelement method (FEM) based on the T-A formulation, where T and A, are the current and magnetic vectorpotentials, respectively. In the simulations, the external magnetic field amplitude (B-m) is up to 500 mT and the reduced AC current (i=I-t/I-c0) varies from 0.1 to 0.9, where theItandIc0are the amplitude of the transport current and self-field critical current of the conductor, respectively. Two different types of rotatingfields are considered: one is a uniform field with equal amplitudes and phases at each position, and the other being a non-uniform field created by a rotating Halbach array. Different tape widths ranging from4 mm to 40 mm are considered. Interestingly, the simulation results show substantially higher magnetizationloss in the perpendicular standing wave compared to the rotating magnetic fields when B-m is over 100 m T. We attribute the result to the fact that the magnetization loss is propotional to Jc of the conductor at magnetic field amplitudes much greater than the effective penetration magnetic field. Evidently, the instantaneous loss curves of the SW model and RMF-Uniform model at 200 mT exhibited close similarity with evolvingJcvalues of the two models. Furthermore, when B-m is lower than the effective penetrated field, we observea pronounced disparity in magnetization loss of the wider tape between uniform and non-uniform rotating fields. This highlights the importance of considering the effects of non-uniform field distribution, particularlyat lower magnetic field. We further show that total AC loss under the perpendicular standing wave magnetic field remains greater than that under rotating magnetic fields when B-m>100 mT and i<0.5.

Effect of substrate magnetism on the ac loss of high temperature superconductor tape-wound coils

Magnetic flux penetration and AC loss in a composite superconducting wire with ferromagnetic parts

Computation of Losses in HTS Under the Action of Varying Magnetic Fields and Currents

Experimental Study on AC Loss of 1G and 2G HTS Coils with an Identical Structure, Geometry and Number of Turns

AC Loss Measurement of Bi-2223 Conductors

Theoretical and experimental study of AC loss in HTS single pancake coils

MAGNETIC FIELD LOSS AND PROPERTIES OF MAGNETIC RESPONSE OF Bi2223/Ag TAPE

Losses in Superconductors under Non-Sinusoidal Currents and Magnetic Fields

Magnetic AC Loss of a Mono-Sr0.6k0.4fe2as2 Tape/ag in Perpendicular Field

Effect of combining a DC bias current with an AC transport current on AC losses in a High Temperature Superconductor

Study on the Influence of Skin Effect on AC Loss of YBCO Tape

AC loss modelling in superconducting coils and motors with parallel tapes as conductor

Numerical Simulations on AC Loss of the REBCO Tape under Rotating Magnetic Field

Flux-transfer losses in helically wound superconducting power cables

Modelling of AC loss in coils made of thin tapes under DC bias current

AC losses in superconducting composite strips in a magnetic field in the form of a standing wave

An Investigation on AC Loss Reduction for Permanent-Magnet Superconducting Electrical Machine

Influence of Coil Position on AC Losses of Stator Superconducting Windings of a Synchronous Machine for a 10 MW Wind Turbine

Reduction Of Ac Transport And Magnetization Loss Of A High-T-C Superconducting Tape By Placing Soft Ferromagnetic Materials At The Edges

Magnetic AC Loss of Monofilament Sr 0 . 6 K 0 . 4 Fe 2 As 2 /ag Tape

Superconductor/ferromagnet heterostructures exhibit potential for significant reduction of hysteretic losses