Abstract:The risk of large-amplitude vibrations of bridge hangers due to galloping instabilities has posed a challenge to the engineering and research communities. Galloping vibrations can lead to serviceability problems and reduce fatigue life. A number of aeroelastic models have been developed to predict the unstable behavior and to design counteracting measures, i.e., shape modifications and structural damping addition. All the proposed procedures generally consider that the parameters are assigned according to deterministic values. A framework is proposed for the deterministic and probabilistic assessment of the minimum structural damping required to prevent galloping of bridge hangers based on the output of a two-degree-of-freedom sectional quasi-steady aeroelastic model. All the variables required to define the hanger dynamics, the sheath aerodynamics, and the local wind climate are considered. Because of the large uncertainties and of the nonlinear nature of the problem, the distribution of the minimum structural damping required to prevent galloping is obtained by Monte Carlo simulations. An application of the method to the proposed Messina Straits crossing bridge is presented. Starting from wind tunnel measurements of the aerodynamic coefficients of a real plain high-density polyethylene (HDPE) cable sheath, the random nature of the aerodynamics is shown, which is ascribed to the cable irregularities (surface roughness, section distortion, and axis curvature). Then the statistical variation of the parameters of the model is considered, based on real data derived from wind tunnel tests and from the wind climate measured at the site. The distributions of the parameters defining the hanger dynamics are assigned according to typical values. Using a normal and a log-normal model of capacity, the probability of failure is calculated. The results are discussed and compared with conventional approaches based on the definition of the deterministic variables. Finally, using a deterministic model of capacity, a simplified closed-form equation for the evaluation of the structural damping needed to prevent galloping in a probabilistic-based performance approach is proposed.

Physical and mathematical simulation of bridge segment oscillations

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Probabilistic Versus Deterministic Assessment of the Minimum Structural Damping Required to Prevent Galloping of Dry Bridge Hangers

A generalized van der Pol nonlinear model of vortex-induced vibrations of bridge decks with multistability

Discussion on Nonlinear Dynamic Behavior of Suspension Based Bridge Model

Simulation for a Bridge Section Model's Wind Tunnel Test Based on Feedback Control

Numerical and experimental assessment of frequencies and amplitudes when swirling excitation of bending vibrations of construction structures

Simulation of train–bridge interaction under wind loads: a rigid-flexible coupling approach

Stability and numerical results for a suspension bridge of Timoshenko type with second sound

Vibration Analysis of Bridge Subjected to a Moving Elastic Vehicle Ith Flexible Connections

Structural instability of nonlinear plates modelling suspension bridges: mathematical answers to some long-standing questions

Nonlinear Dynamic Analysis of Multi-vehicle Vehicle-bridge Coupling System

Rich Dynamics for a Model Arising in the Study of Suspension Bridges

A novel multi-modal analytical method focusing on dynamic mechanism of bridge flutter

Analysis of a nonlinear fish-bone model for suspension bridges with rigid hangers in the presence of flow effects

Oscillations of Bridge Decks Based on VDP Equation

Modeling and Analysis of 1:3 Internal Resonance of Suspension Bridge Under Boundary Excitations

Analyzing Bridge Resonance and Lateral Vibrations Using String Vibration Principles

Time-domain state-space model formulation of motion-induced aerodynamic forces on bridge decks

Coupled dynamic analysis of low and medium speed maglev vehicle-bridge interaction using SIMPACK

Transfer of energy from flexural to torsional modes for the Fish-bone Suspension bridge