Abstract:The linear curve distribution of the beam and the asymmetrical layout of the stay cables may have beneficial or adverse influences on cable-stayed bridges. Sectional model wind tunnel tests and numerical simulations were used to analyze the influence of these two factors on the wind-induced vibration characteristics of a curved beam unilateral stayed bridges (CBUSB) and the interaction between its stay cables and curved beams. According to the basic similarity law, the sectional models of a CBUSB example were designed and manufactured. The aerodynamic force and wind-induced vibration of the models were measured in an atmospheric boundary wind tunnel laboratory to obtain the aerodynamic coefficient and displacement, respectively. Based on the wind tunnel test results, the verified finite element model was used to determine the displacement, acceleration, and cable tension of the CBUSB excited by the buffeting force under 5 curvature cases and 4 cable layout cases. Then, band-pass filter technology and fast Fourier transform technology were used to analyze the influence of these two parameters on the wind-induced vibration characteristics of the CBUSB. Results show that the CBUSB had good aerodynamic stability in the wind tunnel at low and high wind speeds. With increasing curvature, the high-order modal vibration and modal coupling vibration of the CBUSB may be generated. The frequency, the proportion of wind-induced vibration response components, and the distribution characteristics of spectrum energy of CBUSB will be affected by 4 cable layout schemes. Cables arranged on both sides of the bridge and near the center of curvature can improve pedestrian comfort and reduce wind-induced vibration, respectively. Affected by the interaction between cable and bridge, the cable and bridge transmit their own vibration to each other, both of which contain the response components of each other.

Simulation for a Bridge Section Model's Wind Tunnel Test Based on Feedback Control

FE-based Bridge Weigh-in-motion Based on an Adaptive Augmented Kalman Filter

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Simulation of train–bridge interaction under wind loads: a rigid-flexible coupling approach

Self-Contained Eigenvector Algorithm Applied to the Identification of Aerodynamic Derivatives of Bridge Model

Time-domain state-space model formulation of motion-induced aerodynamic forces on bridge decks

Dynamic analysis of train and bridge in crosswinds based on a coupled wind-train-track-bridge model

Passive Control of Bridge Wind-Induced Instabilities by Tuned Mass Dampers and Movable Flaps

A wind tunnel test method on aerodynamic characteristics of moving vehicles under crosswinds

Wind Tunnel Test on the Aerodynamic Parameters of Tianxingzhou Highway-Railway Bridge Across Yangtze River

Numerical Simulation of Dynamic Response of a Long-Span Bridge to Assess Its Vulnerability to Non-Synoptic Wind

Effects of fundamental factors on coupled vibration of wind-rail vehicle-bridge system for long-span cable-stayed bridge

Vehicle–bridge coupling dynamic response of sea-crossing railway bridge under correlated wind and wave conditions

Aeroelastic model study of cantilever skywalk bridge

The Determination of Effective Modes of Wind-Bridge Coupling System Based on Stabilization Clustering Method

Dynamic Numerical Simulation Model and Time-Domain Identification of Flexible AERORail Structure

Wind Tunnel Measurements for Flutter of a Long-Afterbody Bridge Deck

A new type of aerodynamic measurement technology for vehicle model running on bridge under crosswind in wind tunnel test

Flutter performance simulation on streamlined bridge deck with active aerodynamic flaps

Sectional Model Wind Tunnel Test and Research on the Wind-Induced Vibration Response of a Curved Beam Unilateral Stayed Bridge

Finite element model of a cable-stayed bridge updated with vibration measurements and its application to investigate the variation of modal frequencies in monitoring