Abstract:In this paper, a train-track-bridge coupled dynamics modeling and coupling method was proposed. The coupled dynamic system was modeled separately with multiple subsystems by finite element method and the three-dimensional nonlinear wheel-rail contact relationship was used to account for non-linearity. Using explicit numerical methods and coupling the subsystems by the load term on the right end of the dynamic equations, repetitive iteration in the dynamic response solution process was avoided. Thus, a simplified the solution of nonlinear dynamic models can be achieved in limited time. In order to meet the requirement of diagonalization of the mass matrix in the algorithm, the modal superposition method was adopted. In the solution method proposed in this study, only a set of mass, damping, and stiffness matrices of the subsystem structure need to be established for solution instead of building the total matrix of the coupled dynamic system. Thus, greatly reduce the dynamic system matrix dimension for periodic train-track-bridge coupled dynamic systems. The train-track-bridge coupled dynamics model proposed in this paper is suitable to model various track and bridge structures, the wheel-rail contact relationship used is closer to reality and has more accuracy in describing the force state between wheel and rail. Besides, the unit size, number of modalities and numerical integration step size required in the calculation of each subsystem have been determined based on numerical experiments. Using the established dynamics model, the effects of the commonly used bound and separation ballastless track structures on the train operation safety was analyzed employing single-sample and multi-samples analysis. The calculation results demonstrated that the separation model is preferable for the prediction of train operation safety.

Dynamic Numerical Simulation Model and Time-Domain Identification of Flexible AERORail Structure

A Numerical Method for Analyzing the Low-Frequency Noise of Bridge under Vehicle Load

General Reduced Vehicle Model for Simulating Truck-Bridge Pier Collisions

A Novel Model for Train–Track-Bridge Dynamic Interaction Considering Non-Uniform Structural Parameters and Nonlinear Interlayer Contact

Simulation of train–bridge interaction under wind loads: a rigid-flexible coupling approach

Three-dimensional train–track–bridge coupled dynamics model based on the explicit finite element method

Random dynamic analysis on a high-speed train moving over a long-span cable-stayed bridge

An interactive method for the analysis of the simulation of vehicle–bridge coupling vibration using ANSYS and SIMPACK

Simulation and Experiment Study on System Identifications of Elastically Jointed Structures

Influence of bridge parameters on monorail vehicle–bridge system— A research with multi-rigid body and multi-flexible body coupling theory and Park method

A dynamic analysis scheme for the suspended monorail vehicle–curved bridge coupling system

Coupled dynamic analysis of low and medium speed maglev vehicle-bridge interaction using SIMPACK

Vector Form Intrinsic Finite-Element Analysis for Train and Bridge Dynamic Interaction

Simulation for a Bridge Section Model's Wind Tunnel Test Based on Feedback Control

A Case Study of Dynamic Response Analysis and Safety Assessment for a Suspended Monorail System

A time domain method for wheel-rail force identification of rail vehicles

An efficient modeling methodology of monorail train and large-scale bridge interaction based on moving element technology

Dynamic performance analysis of a urban rail vehicle based on rigid-flexible coupling

Nonlinear model for the dynamic analysis of a time-dependent vehicle-cableway bridge system

High-speed train–track–bridge dynamic interactions – Part I: theoretical model and numerical simulation

Dynamic performance evaluation of rail fastening system based on a refined vehicle-track coupled dynamics model