Abstract:As a classic bridge type, cable-stayed bridge is widely used because of its superior spanning capacity. Based on the mechanical characteristics of stay cable supporting deck, we propose a novel mechanical model aiming to evaluate the vertical bending stiffness of a floating cable-stayed bridge, namely, multi-beam model with discrete springs. First, a single-tower cable-stayed bridge is modeled as a triple-beam model with discrete springs in order to introduce the novel method easily. In this model, the stay cables are simplified as springs without mass and the single tower is regarded as an Euler–Bernoulli beam with consideration of the effect of axial force. At the same time, the bridge deck has been cut into two Euler–Bernoulli beams at the intersection of a deck and a tower. Then equations governing vibrations of the beam and tower are derived according to Hamilton’s principle for dynamic problems in elastic body under equilibrium state. The program is established by transfer matrix method to solve the eigenvalues of the system along with its boundary and matching conditions. Thus, the vertical bending stiffness of the floating cable-stayed bridge can be evaluated based on the frequency. In addition, the influences of the cables’ material, location, stiffness and number on vertical bending stiffness are analyzed in detail when the steel cables are replaced with CFRP cables. Lastly, the same method is directly extended to modeling the floating multi-tower cable-stayed bridge. The results, which are validated by commercial finite element software, demonstrate that the proposed mechanical model and method are both valuable and significant not only in theoretical research and calculation but also in design of engineering.

Stability and numerical results for a suspension bridge of Timoshenko type with second sound

Damping Parameter Identification Of Large Span Cable-Stayed Bridges

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

On the internal and boundary stabilization of a nonlinear suspension bridge system: Exponential and polynomial decay rates

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Discussion on Nonlinear Dynamic Behavior of Suspension Based Bridge Model

Structural instability of nonlinear plates modelling suspension bridges: mathematical answers to some long-standing questions

Stability for the Timoshenko Beam System with Local Kelvin–Voigt Damping

Long-Term Damped Dynamics of the Extensible Suspension Bridge

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Experimental and Theoretical Investigation on Nonlinear Behavior of Cable-Stayed Bridges

Mathematical Analysis and Numerical Computation of String Vibration Equations with Elastic Supports for Bridge Cable Force Evaluation

On a Nonlinear Nonlocal Hyperbolic System Modeling Suspension Bridges

Modeling and Analysis of 1:3 Internal Resonance of Suspension Bridge Under Boundary Excitations

Torsional instability and sensitivity analysis in a suspension bridge model related to the Melan equation

Analysis of a nonlinear fish-bone model for suspension bridges with rigid hangers in the presence of flow effects

Modeling, dynamics, and parametric studies of a multi-cable-stayed beam model

Modeling and Parametric Analysis of In-Plane Free Vibration of a Floating Cable-Stayed Bridge with Transfer Matrix Method

Rich Dynamics for a Model Arising in the Study of Suspension Bridges

Numerical analysis of vehicle-bridge coupling vibration concerning nonlinear stress-dependent damping