On the relation between maximal thermal performance and minimal fouling deposition rate in heat exchanger-like devices
E. Sandrin,A.M. Hissanaga,J.R. Barbosa,A.K. da Silva
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122518
IF: 6.4
2024-02-02
Applied Thermal Engineering
Abstract:The present article numerically studies the relationship between a heat exchanger's thermal performance and the occurrence of fouling, here represented by the deposition of calcium sulfate (CaSO 4 ) on its surface. For that, a 2D geometry denoting the internal flow of a CaSO 4 saturated aqueous solution between two parallel plates is simulated. The flow, which can be laminar or turbulent (k-ω SST model), is promoted by a known pressure difference across the channel, while the CaSO 4 fouling is thermally triggered by a heat source in the central part of the channel. The numerical model considers the solution of the conservative equations of mass, momentum, and energy, while the mass transfer rate is determined based on a correlation available in the literature. Two approaches were used to determine the CaSO 4 fouling rate: (i) the CaSO 4 concentration on the fouling's surface was assumed to be identical to the concentration of the bulk flow, and (ii) the fouling concentration varies spatially, hence requiring the solution of the differential equation for conservation of species. The steady analysis showed that for both approaches, the optimal plate-to-plate spacing that maximizes the thermal performance is similar to the spacing that minimizes the fouling deposition. Finally, the transient analysis, which also considers the effect of the fouling removal rate through shear, shows that deviations might occur between the optimal spacings for maximal thermal performance and minimal deposition, especially for lower pressure drop values.
energy & fuels,engineering, mechanical,thermodynamics,mechanics