Abstract:The condensation water-bridge phenomenon of the heat exchanger surface fins is a common undesirable phenomenon in refrigeration systems and heat pump systems, which would significantly affect the heat exchanger's thermal efficiency due to insulation and obstruction of airflow. Based on the lack of experimental studies on louvered-fin heat exchangers and surface energy for fin-surface condensation, this paper experimentally investigates the effect of wettability (surface energy) on the condensation mechanism and heat exchanger performance. Firstly, hydrophilic and hydrophobic coatings are formed by reagent deposition, which regulates the surface energy of the fins. Experiments are designed to investigate the effect of surface energy on heat exchanger performance at different temperatures, humidity, and wind speed. Finally, the key issues such as condensation morphology are discussed in detail by molecular dynamics simulation, thus filling the gap and providing a reference for heat exchanger surface construction. The experimental results show that the wet condition has a faster condensation rate, with an average rate reduction of 33.2%. Both hydrophilic and hydrophobic fins could improve the performance of the heat exchanger compared to bare fins due to their inherent uniqueness. The hydrophilic fins have a smaller pressure drop, maintain a more stable heat transfer rate, and improve the heat transfer performance by 13.4% in a typical environment (60%) or with lower water content. While the hydrophobic fins show advantages in a wet environment (80%), improving the heat transfer performance by 17.8% due to the severe deterioration of the bare heat exchanger performance. Further, molecular-scale condensation patterns were analyzed, and condensation rates and adsorption forces were quantified. The experimental and simulation results guide the construction and selection of surface energy to optimize the heat transfer surface.

Thermal-hydraulic Performance of Super-Amphiphobic Louver-Fin Flat-Tube Heat Exchanger under Fouled Condition

Performance of the frosting characteristics of fin-and-tube heat exchanger subject to superhydrophobic coating

Experimental Study of the Airside Performance for Interrupted Fin-and-tube Heat Exchanger with Hydrophilic Coating under Dehumidifying Conditions

Thermal-hydraulic Performance of Novel Louvered Fin Using Flat Tube Cross-Flow Heat Exchanger

Airside Heat Transfer and Friction Characteristics for Enhanced Fin-and-tube Heat Exchanger with Hydrophilic Coating under Wet Conditions

The Effect of Hydrophilic Coating on Airside Performance of Split Fin-and-Tube Heat Exchangers under Wet Conditions

Influence of Surface Modification on the Transient Dehumidification Performance of Fin-and-tube Heat Exchanger

Experimental Study of the Air Side Performance of Fin-and-Tube Heat Exchanger with Different Fin Material in Dehumidifying Conditions

Research on the Wet Performance and Long-term Characteristics of Microchannel Heat Exchanger with Surface Coating

Molecular Dynamics Simulation and Experimental Study of Heat Transfer and Phase Change of Water with Slit Effect

Effects of Hydrophilic Coating on Air Side Heat Transfer and Friction Characteristics of Wavy Fin and Tube Heat Exchangers under Dehumidifying Conditions

Heat Transfer and Fouling Performance of Finned Tube Heat Exchangers: Experimentation Via on Line Monitoring

Numerical study flow and heat transfer characteristics of superhydrophobic single tube bundle surface and wake flow

Experimental Study on the Boiling/condensation Heat Transfer Performance of a Finned Tube with a Hydrophilic/hydrophobic Surface

Investigation of the condensation heat-transfer between the wet air and 3-D finned-tube heat exchanger surface with different anti-corrosion coatings

Fabrication and Characterization of Superhydrophobic Al-Based Surface Used for Finned-Tube Heat Exchangers

Drag Reduction and Heat Transfer Characteristics of Water Flow Through the Tubes with Superhydrophobic Surfaces

Thermal-hydraulic Performance Enhancement Analysis of Microtube with Superhydrophobic Surfaces

Effects of surface characteristic on frosting and defrosting behaviors of fin-tube heat exchangers

Air-side Heat Transfer and Friction Characteristics of Biofouled Evaporator under Wet Conditions

Frosting Behavior of Louvered-Fin and Tube Heat Exchanger after Surface Treatment: Experimental Analysis