Abstract:High Al Low-density steels could have a transformative effect on the light-weighting of steel structures for transportation. They can achieve the desired properties with the minimum amount of Ni, and thus are of great interest from an economic perspective. In this study, the mechanical properties of two duplex low-density steels, Fe-15Mn-10Al-0.8C-5Ni and Fe-15Mn-10Al-0.8 C (wt.%) were investigated through nano-indentation and simulation through utilization of ab-initio formalisms in Density Functional Theory (DFT) in order to establish the hardness resulting from two critical structural features (κ-carbides and B2 intermetallic) as a function of annealing temperature (500–1050 °C) and the addition of Ni. In the Ni-free sample, the calculated elastic properties of κ-carbides were compared with those of the B2 intermetallic Fe3Al−L12 and the role of Mn in the κ structure and its elastic properties were studied. The Ni-containing samples were found to have a higher hardness due to the B2 phase composition being NiAl rather than FeAl, with Ni-Al bonds reported to be stronger than the Fe-Al bonds. In both samples, at temperatures of 900 °C and above, the ferrite phase contained nano-sized discs of B2 phase, wherein the Ni-containing samples exhibited higher hardness, attributed again to the stronger Ni-Al bonds in the B2 phase. At 700 °C and below, the nano-sized B2 discs were replaced by micrometre sized needles of κ in the Ni-free sample resulting in a lowering of the hardness. In the Ni-containing sample, the entire α phase was replaced by B2 stringers, which had a lower hardness than the Ni-Al nano-discs due to a lower Ni content in B2 stringer bands formed at 700 °C and below. In addition, the hardness of needle-like κ-carbides formed in α phase was found to be a function of Mn content. Although it was impossible to measure the hardness of cuboid κ particles in γ phase because of their nano-size, the hardness value of composite phases, e.g. γ + κ was measured and reported. All the hardness values were compared and rationalized by bonding energy between different atoms.

Microstructural characterisation of intercritically annealed 0·5 wt-%Ni and Mn added steels prepared by powder metallurgy method

Effect of Annealing Temperature and Time on Microstructure Evolution of 0·2c–5mn Steel During Intercritical Annealing Process

Effect of Intercritical Temperature on the Microstructure and Mechanical Properties of a Ferritic–Martensitic Dual-Phase Low-Alloy Steel with Varying Nickel Content

Influence of Intercritical Temperature on the Microstructure and Mechanical Properties of 6.5 Pct Ni Steel Processed by Ultra-fast Cooling, Intercritical Quenching and Tempering

Effect of intercritical annealing temperature on microstructure and mechanical properties of V-Ti-Mo microalloyed medium Mn steel

Austenite Formation and Cementite Dissolution During Intercritical Annealing of a Medium-Manganese Steel from a Martensitic Condition

Intercritically Annealed Medium-Manganese Steel: Insights into Microstructural and Microtextural Evolution, Strain Distribution, and Grain Boundary Characteristics

Influence of silicon addition on intercritical annealing process and tensile properties of medium Mn steel

High strength and ductility combination in nano-/ultrafine-grained medium-Mn steel by tuning the stability of reverted austenite involving intercritical annealing

The In Situ Observation of Phase Transformations During Intercritical Annealing of a Medium Manganese Advanced High Strength Steel by High Energy X-Ray Diffraction

Microstructure Evolution and Mechanical Properties of Ferrite–Austenite Duplex Fe-Mn-Al-(Cu)-C Steel under Different Annealing Temperatures

Effect of Intercritical Annealing Time on Microstructure Evolution and Mechanical Properties of Low Carbon Medium Manganese Steel Subjected to Multi-Step Heat Treatment Process

Influence of Intercritical Annealing on Microstructure, Ductility, and Toughness of Medium Mn Steels

Microstructural Characterization of Al0.5CrFeNiTi High Entropy Alloy Produced by Powder Metallurgy Route

The influence of annealing temperature on the microstructure and mechanical properties of Fe-0.52C-11Mn-5.14Al-1Cr lightweight Steel

Microstructure Evolution and Kinetics Analysis During Tempering of Mn–Ni–Mo Nuclear Power Forging Steel

The impact of intercritical annealing temperature on microstructure and mechanical properties of an ultra-low carbon medium manganese heavy steel plates

Influence of ε-martensite and austenite on mechanical properties by intercritical annealing in 0.1C-11Mn medium manganese steel

Microstructure and mechanical properties of a medium manganese steel treated with interrupted quenching and intercritical annealing

Nano-mechanical Properties of Fe-Mn-Al-C Lightweight Steels

Microstructure and Mechanical Properties of the 6 wt% Mn-Doped Martensitic Steel Strengthened by Cu/NiAl Nanoparticles