Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The present research aims to investigate the influence of and the relationship between welding speed (v), focal position (FP), and laser power (LP) as input parameters for fiber laser to weld P91 under pure argon and CO2 shielding atmospheres using response surface methodology and using the desirability approach; optimization of input parameters has been performed to maximize the depth of penetration (DP) while minimizing the top bead width (TW) and heat-affected zone width (HW). The results indicate that laser power (LP) has the most significant impact on depth of penetration (DP), whereas welding speed (v) affects top bead width (TW) and heat-affected zone width (HW). The optimal combination of parameters under argon shielding results in a significantly low heat input of 48 J/mm (0.048 kJ/mm) and 50 J/mm (0.050 kJ/mm) pure argon and CO2 shielding atmospheres, respectively. Despite the difference in heat input being only 4.08%, an 11.618% increase in DP is observed under the CO2 shielding atmosphere. Due to the high-speed nature of the welding process (argon: 82.65 mm/s and CO2: 79.283 mm/s) combined with the significant reduction in heat input, the heat-affected zone is limited to a mere width of 0.203 mm under an argon shielding atmosphere and 0.263 mm under the CO2 shielding atmosphere compared with that reported in the other welding processes without the dissolution of precipitates in the fusion boundary of heat-affected zone. Microstructural characterization of the fusion zone has revealed the presence of an untempered lath martensite structure with precipitate dissolution. The precipitate dissolution has resulted in grain coarsening of 47.76% in argon weld and 39.65% in CO2 weld compared with the base metal grain size of 6.07 μm.

Study on Effect of Laser Process Parameters on Laser Transmission Weld Parameters using ANSYS

Laser Transmission Welding of Thermoplastic: Effect of Process Parameters on Weld Strength

Experimental Investigation on Laser Transmission Welding of Polycarbonate and Acrylic

Finite element simulation of laser transmission thermoplastic welding of circular contour using a moving heat source

Optimization of Laser Transmission Welding Process Parameters Using Single Objective and Multi Objective Optimization Technique

Influence of process parameters in blue laser welding of copper and aluminum thin sheets

Laser Transmission Welding of Polypropylene: Insights into Parameter Interplay, Thermal Analysis, Bonding Quality, Fracture Characteristics, and Weld Morphology

A study of laser welding modes with varying beam energy levels

Numerical and experimental investigation on laser transmission welding of fiberglass-doped PP and ABS

Process optimization and thermomechanical simulation of residual stresses and temperature distribution in the laser-beam penetration welds of 61Ni-21Cr-9Mo alloy and 99.3Fe-0.45Mn-0.2C steel joints

Infrared observations and finite element modeling of a laser transmission welding process

Parametric study of the laser energy absorption in high-power laser beam welding

Numerical Study of the Effect of Laser-Arc Distance on Laser Energy Coupling in Pulsed Nd: YAG Laser/tig Hybrid Welding

Experimental and Numerical Assessment of Temperature Field and Analysis of Microstructure and Mechanical Properties of Low Power Laser Annealed Welded Joints

Finite element analysis of CFRP and stainless steel laser welding

Experimental study on gap bridging in contour laser transmission welding of polycarbonate and polyamide

Mechanism and Numerical Simulation Analysis of Laser Welding 5182 Aluminum Alloy/pa66 Based on Surface Texture Treatment

Analyzing the effect of different shielding atmospheres on fiber laser welding parameters for modified 9Cr-1Mo steel

A Combined RSM – FEM Analysis of Weld Quality in Laser Transmission Welding of Plastics

Semiconductor Laser Transmission Welding of Thermoplastic Polypropylene

Mechanism Study on the Effects of Side Assisting Gas Velocity During Co2 Laser Welding Process