Abstract:The modelling of the adherence energy during peeling of Pressure Sensitive Adhesives (PSA) has received much attention since the 1950's, uncovering several factors that aim at explaining their high adherence on most substrates, such as the softness and strong viscoelastic behaviour of the adhesive, the low thickness of the adhesive layer and its confinement by a rigid backing. The more recent investigation of adhesives by probe-tack methods also revealed the importance of cavitation and stringing mechanisms during debonding, underlining the influence of large deformations and of the related non-linear response of the material, which also intervenes during peeling. Although a global modelling of the complex coupling of all these ingredients remains a formidable issue, we report here some key experiments and modelling arguments that should constitute an important step forward. We first measure a non-trivial dependence of the adherence energy on the loading geometry, namely through the influence of the peeling angle, which is found to be separable from the peeling velocity dependence. This is the first time to our knowledge that such adherence energy dependence on the peeling angle is systematically investigated and unambiguously demonstrated. Secondly, we reveal an independent strong influence of the large strain rheology of the adhesives on the adherence energy. We complete both measurements with a microscopic investigation of the debonding region. We discuss existing modellings in light of these measurements and of recent soft material mechanics arguments, to show that the adherence energy during peeling of PSA should not be associated to the propagation of an interfacial stress singularity. The relevant deformation mechanisms are actually located over the whole adhesive thickness, and the adherence energy during peeling of PSA should rather be associated to the energy loss by viscous friction and by rate-dependent elastic hysteresis.

Application of the bulk properties of an acrylic pressure-sensitive adhesive to peeling

Experimental approach for measuring the peeling strength of a sheet bonded on a curved adherend with pressure sensitive adhesive and predicting the peeling resistance by finite element analysis

Modification Research on the Peel Strength of the Acrylate Emulsion Pressure-Sensitive Adhesives (vol 131, 40095, 2014)

Rate-dependent elastic hysteresis during the peeling of Pressure Sensitive Adhesives

Interfacial fatigue fracture of pressure sensitive adhesives

Adhesive Failure of Model Acrylic Pressure Sensitive Adhesives

Nonlinear Viscoelastic Modeling of Adhesive Failure for Polyacrylate Pressure-Sensitive Adhesives

Approaches Based on Strength of Materials for Adhesion Strength Considering Thickness of PSA Layer and Backing

Peeling pressure-sensitive adhesive elastica from elastica with pinned and roller ends

Peeling an elastic film from a soft viscoelastic adhesive: experiments and scaling laws

Adhesive Performance of Acrylic Pressure-Sensitive Adhesives from Different Preparation Processes

An Exploratory Study on Determining and Modeling the Creep Behavior of an Acrylic Pressure-Sensitive Adhesive

Effect of Interfacial Slippage in Peel Test: Theoretical Model.

Predictive mechanistic model for single-layered pressure-sensitive adhesive (PSA) joints

Light-Activated Adhesion and Debonding of Underwater Pressure-Sensitive Adhesives

A Systematic Method for Characterizing the Elastic Properties and Adhesion of a Thin Polymer Membrane

Bulk and Interfacial Contributions to the Debonding Mechanisms of Soft Adhesives: Extension to Large Strains

The Extended Peel Zone Model: Effect of Peeling Velocity

Enhancing adhesion of fluorinated ethylene propylene through atmospheric pressure nitrogen plasma treatment: a comprehensive adhesive selection approach for optimal peel strength characterization

Fabrication and peeling behavior of thermally conductive pressure-sensitive adhesive films with embedded graphite composite patterns

Toughening and Asymmetry in Peeling of Heterogeneous Adhesives