Abstract:An analytical and numerical study was made on thermally developing forced convective flow in a channel filled with a fluid-saturated porous medium, subject to constant heat flux, under local thermal non-equilibrium. The Brinkman-extended Darcy model was employed to investigate the combined effects of the Darcy number, Biot number, effective thermal conductivity ratio and Graetz number on the longitudinal thermal development in a channel filled with a highly porous medium. 3D convective regime maps were constructed for wide ranges of the parameters, using a 3D coordinate system based on the Biot, Darcy and Graetz number coordinates. The 3D convective regime maps proposed in this study enable one to identify the three distinctive thermal regions possible along the longitudinal coordinate in a channel, namely the entrance developing region, transition region and fully developed region, depending on the relative thicknesses of the fluid and solid thermal boundary layers. It has been found that the Darcy number strongly influences the heat transfer rate in the developing region, yielding a higher Nusselt number for a lower Darcy number, whereas both Biot number and the effective thermal conductivity ratio markedly influence the level of the fully developed Nusselt number. The heat transfer performance evaluation carried out under equal pumping power for the aluminum foam embedded channel saturated with air reveals that a substantial heat transfer argumentation is possible by filling the channel with an aluminum foam.

COMBINED LAMINAR FORCED CONVECTION AND NONGRAY-RADIATION HEAT TRANSFER TO CARBON DIOXIDE FLOWING IN A NONBLACK, PLANE-PARALLEL DUCT

Simulation And Analysis On Heat Transfer In Laminar Oscillatory Flow In-Tube

Combined convection–radiation heat transfer from n-octane combusted gas passing through different geometrical ducts

Numerical Research on Convective Heat Transfer and Resistance Characteristics of Turbulent Duct Flow Containing Nanorod-Based Nanofluids

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Finite element analysis of laminar convective heat transfer in vertical ducts with arbitrary cross-sections

Numerical Analysis of the Laminar Heat Transfer and Flow Situation Around a Square Rod Spacer in a Flow Passage.

Bifurcated Forced Convective Heat Transfer of Supercritical CO2 Flow in Plane Symmetric Sudden Expansion Duct

A Fundamental-Study of the Heat-Transfer and Flow Situation Around Spacers (A Single Row of Several Cylindrical Rods in Cross Flow)

A Numerical Study of Combined Forced Convection and Gas Radiation From a Circular Cylinder in Cross Flow

Numerical Investigation of Thermally Developing Non-Darcy Forced Convection in a Porous Circular Duct with Asymmetric Entrance Temperature under LTNE Condition

Numerical Investigation on Heat Transfer of Supercritical Carbon Dioxide in a Vertical Tube under Circumferentially Non-Uniform Heating

Computation of natural convection heat transfer from an infrared suppression device (IRS) with multiple louvered cylindrical funnels

Numerical Simulation on Mixed Convection in a Porous Medium Heated by a Vertical Cylinder

Non-Darcian Analysis On Convective Heat Transfer In The Entrance Region For Flow In Packed Channels

Numerical Simulation on Coupled Radiative-Convective Heat Transfer of Laminar Entrance Flow in Tubes

Analytical and Numerical Study on Thermally Developing Forced Convective Flow in a Channel Filled with a Highly Porous Medium Under Local Thermal Non-Equilibrium

Laminar Heat Transfer Inside Concentric Annular Duct in Entrance Region and Effects of Variable Fluid Properties

Forced Convective Heat Transfer and Pressure Drop of Air Flowing in a Rectangle Duct with Cross-Ribs on the Opposite Walls

Entrance and Temperature Dependent Viscosity Effects on Laminar Forced Convection in Straight Ducts With Uniform Wall Heat Flux

Heat transfer analysis of Radiative-Marangoni Convective flow in nanofluid comprising Lorentz forces and porosity effects