Abstract:Identification of the heteroatom (nitrogen, sulfur, and oxygen)-containing compounds of petroleum is of key importance when considering industrial and environmental issues associated with crude oil production. The more commonly performed methods of crude oil fractionation are often insufficient in the extent to which they separate oils, not allowing defined "molecular" fractions to be obtained. Methods capable of performing a class type separation are uncommon and are often extensive and resource and time intensive. Here we report a method for the separation of crude oils into discrete compound classes. The method utilizes both ion exchange and normal phase chromatography to generate fractions of saturated hydrocarbons, aromatic hydrocarbons, basic compounds, naphthenic acids, and other oxygen-containing species, carbazoles, sulfones, and thiophenes from small crude oil samples (∼0.5 g). Assessment of method selectivity with a suite of model compounds has shown the fractions to be well-defined, with classes of model compounds isolated within discrete fractions. Application of the method to five crude oils of varying API gravity (12.1-38.3°) demonstrates a potential for wide-ranging use. Sample recoveries were high (77-98%) with simple evaporative losses correlating closely with total sample loss. Repeatability was also high, demonstrated by triplicate analyses of model compound mixtures, oils spiked with model compounds and oils alone. Separation selectivity was further demonstrated by application of the scheme to the Alaska North Slope (ANS) crude oil and analysis of fractions by comprehensive two-dimensional gas-chromatography mass-spectrometry (GC × GC/MS) and/or liquid-chromatography high-resolution accurate-mass mass-spectrometry methods (LC-HRAM-MS). Isolation of discrete fractions then allowed excellent separation (by LC and GC methods) of carbazole, dibenzothiophene, fluorenones, xanthones, and quinoline fractions. Individual parent and C1-5 alkyl homologues were easily separated (GC × GC/MS), allowing high-quality mass spectra (EI) to be obtained for the individual compounds in many cases. Analysis of fractions by GC × GC/MS also allowed a series of thioxanones to be identified.

CHARACTERIZATION AND DEPOSIT FORMING-TENDENCY OF POLAR COMPOUNDS IN CRACKED COMPONENTS OF GASOLINE. PART 1 GENERAL SEPARATION SCHEME AND IDENTIFICATION OF BASIC FRACTION.

One-step Removal of Alkynes and Propadiene from Cracking Gases Using a Multi-Functional Molecular Separator

Class Type Separation of the Polar and Apolar Components of Petroleum

Fundamental study of jet fuel oxidative deposit formation

FTIR and SEM/EDS Analyses of the Deposits from a Gasoline Direct Injection Engine

Extraction of N- and S-compounds in gasoline and diesel from ionic liquids: A molecular dynamics study

Isolation of Sulfides from Petroleum for Molecular Characterization by Alumina and Silica Gel Adsorption

Molecular characterization of polar species in Canadian oil sand bitumens by electrospray ionization and high resolution mass spectrometry

Comprehensive two-dimensional liquid chromatography with inductively coupled plasma mass spectrometry detection for the characterization of sulfur, vanadium and nickel compounds in petroleum products

Understanding Asphaltene Fraction Behavior through Combined Quartz Crystal Resonator Sensor, FT-ICR MS, GPC ICP HR-MS, and AFM Characterization. Part I: Extrography Fractionations

SEPARATION OF ASPHALTENES BY POLARITY USING LIQUID-LIQUID EXTRACTION

Quantitative Molecular Composition of Heavy Petroleum Fractions: A Case Study of Fluid Catalytic Cracking Decant Oil

Characterization of Nitrogen- and Oxygen-Containing Compound Types in Petroleum Residues by Infrared Spectroscopy

Investigating analyte breakthrough under non-linear isotherm conditions during solid phase extraction facilitated by non-targeted analysis with comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry

Study of Extraction Desulfurization Capability of FCC Gasoline by Sulfate Ionic Liquids

STUDY ON THE REMOVAL OF SULFUR COMPOUNDS IN GASOLINE BY SELECTIVE ADSORPTIVE DESULFURIZATION PROCESS

STUDY ON FCC GASOLINE DESULFURIZATION BY SOLVENT EXTRACTION

Separation and determination of the group-type composition of modern base and lubricating oils with a wide range of polarity, especially emitted to the environment

Determination of Unsaturated Hydrocarbons in Oil and Its Processing Products by Capillary Gas Chromatography and High-Performance Liquid Chromatography

Silver bonded to silica gel applied to the separation of polycyclic aromatic sulfur heterocycles in heavy gas oil