Abstract:In this work, three 4-dimethylaminopyridinium-based ionic liquids (ILs), N-ethyl-4-dimethylaminopyridinium dicyanamide ([C(2)(4)DMAPy][N(CN)(2)]), N-butyl-4-dimethylaminopyridinium dicyanamide ([C(4)(4)DMAPy][N(CN)(2)]) and N-hexyl-4-dimethylaminopyridinium dicyanamide ([C(6)(4)DMAPy][N(CN)(2)]), were synthesized and then demonstrated to be efficient for aromatic sulfur compounds extraction from fuels. The mutual solubility evaluating results indicated that 4-dimethylaminopyridinium-based ILs hardly dissolved in the fuels, while the solubility of 97(#) gasoline in ILs varies from 7.0 wt % for [C(2)(4)DMAPy][N(CN)(2)] to 12.4 wt % for [C(6)(4)DMAPy][N(CN)(2)] and the solubility of 0(#) diesel in ILs varies from 6.7 wt % for [C(2)(4)DMAPy][N(CN)(2)] to 9.7 wt % for [C(6)(4)DMAPy][N(CN)(2)]. Also, the sulfur partition coefficient was evaluated. In the case of model gasoline, the thiophene (TS) partition coefficient in model gasoline varies from 0.885 for [C(2)(4)DMAPy][N(CN)(2)] to 1.218 for [C(6)(4)DMAPy][N(CN)(2)]. In the case of model diesel, 4-dimethylaminopyridinium-based ILs exhibit a relatively higher sulfur partition coefficient, compared to alkyl modified pyridinium-based ILs. H-1 NMR results confirmed that the high aromatic pi-electron density of the dimethylaminopyridinium cation was the main reason for the good extraction performance. H-1 NMR results also confirmed the K-N sequence for each IL ([C(2)(4)DMAPy][N(CN)(2)] < [C(4)(4)DMAPy][N(CN)(2)] < [C(6)(4)DMAPy][N(CN)(2)]) is mainly due to the sulfur compounds and ILs structures. Furthermore, the extractive selectivity results indicated a more preferable extraction of TS than toluene with 4-dimethylaminopyridinium-based ILs. To have a better evaluation of the overall sulfur extraction performance, the three 4-dimethylaminopyridinium-based ILs were compared to other typical ILs (e.g., pyridinium-based ILs and imidazolium-based ILs), which suggested our synthesized 4-dimethylaminopyridinium-based ILs exhibited good balance between mutual solubility and the sulfur partition coefficient. ILs after use were regenerated by a water dilution process. Based on these results, 4-dimethylaminopyridinium-based ILs can be used as potential extractants for EDS processes.

Extraction of N- and S-compounds in gasoline and diesel from ionic liquids: A molecular dynamics study

Gas Separation Based on Ionic Liquids

Study of Extraction Desulfurization Capability of FCC Gasoline by Sulfate Ionic Liquids

Solute structure effect on polycyclic aromatics separation from fuel oil: Molecular mechanism and experimental insights

Long-Chain Carboxylate Ionic Liquids Combining High Solubility and Low Viscosity for Light Hydrocarbon Separations

Extractive Distillation of Hydrocarbons with Dimethylformamide: Experimental and Simulation Data

Advanced Liquid Membranes Based On Novel Ionic Liquids For Selective Separation Of Olefin/Parafrin Via Olefin-Facilitated Transport

Deep Desulfurization Of Fuels By Extraction With 4-Dimethylaminopyridinium-Based Ionic Liquids

Molecular mechanism and extraction performance evaluation of ionic liquids for extraction process of n-heptane/n-propanol

Efficient desulfurization of gasoline fuel using ionic liquid extraction as a complementary process to adsorptive desulfurization

STUDY ON THE EXTRACTION PERFORMANCE OF NEW IONIC LIQUID FOR REMOVING BENZOTHIOPHENE AND DIBENZOTHIOPHENE

Extraction of Pyrrole from Its Mixture with n-Hexadecane Using Protic Ionic Liquids

Toward Modeling the Aromatic/Aliphatic Separation by Extractive Distillation with Tricyanomethanide-Based Ionic Liquids Using CPA EoS

Deep Desulfurization of Fuels Using Imidazole Anion-Based Ionic Liquids

Toluene/n-Heptane Separation by Extractive Distillation with Tricyanomethanide-Based Ionic Liquids: Experimental and CPA EoS Modeling

Extraction of benzene, ethylbenzene, and xylenes from n-heptane using binary mixtures of [4empy][Tf2N] and [emim][DCA] ionic liquids

Extraction of Ni and V from petroleum using ionic liquids: A promising approach

Extraction of benzene or thiophene from n-heptane using ionic liquids. NMR and thermodynamic study

The extraction of aromatics using n-methylpyrrolidone: Liquid-liquid equilibrium determination and mechanism exploration

Desulfurization of Diesel Using Ionic Liquids: Process Design and Optimization Using COSMO-Based Models and Aspen Plus

Oxidative and Extractive Desulfurization of Fuel Oils Catalyzed by N -Carboxymethyl Pyridinium Acetate and N -Carboxyethyl Pyridinium Acetate Acidic Ionic Liquids: Experimental and Computational DFT Study