Abstract:A physically based material model for metals, with elastic–plastic and damage/failure orthotropy is proposed in this paper. The model is defined within the frameworks of irreversible thermodynamics and configurational continuum mechanics and integrated in the isoclinic configuration. The use of the multiplicative decomposition of deformation gradient makes the model applicable to arbitrary plastic and damage deformations. To account for the physical mechanisms of failure, the concept of thermally activated damage initially proposed by Klepaczko (1990) was adopted as the basis for the new damage evolution model. This makes the proposed damage/failure model compatible with the Mechanical Threshold Strength (MTS) model (Follansbee and Kocks, 1988; Chen and Gray, 1996; Goto et al., 2000; Gray et al., 1999; Chen et al., 1998) which was used to control evolution of flow stress during plastic deformation. In addition the constitutive model is coupled with a shock equation of state which allows for modelling of shock wave propagation in the material. The new model was implemented in DYNA3D and our in-house non-linear transient SPH code, MCM (Meshless Continuum Mechanics).Parameters for the new constitutive model for AA7010 (a polycrystalline aluminium alloy, whose orthotropy is a consequence of grain morphology), were derived on the basis of the tensile tests and Taylor anvil tests. The tensile tests were performed for the range of temperatures between 223.15K and 413.15K, and strain rates between 6.4×10-4s-1 and 6.4×101s-1.The new model was validated in two stages. The first stage comprised a series of single element tests design to separately validate elasticity, plasticity and damage related parts of the model. The second stage comprised a series of numerical simulations of Taylor anvil and plate impact tests for AA7010 and comparison of the numerical results with the experimental data. The numerical results illustrate the ability of the new model to predict experimentally observed behaviour.

A model of the mechanics of shear-crack propagation in tearing for amorphous metals I. Critical shear stress for inhomogeneous flow

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

Dynamic Localized Shear Failure Influenced by Changing Rates in Brittle Solids Containing Initial Microcracks

Micromechanics-based model study of shear properties of brittle rocks

Ductile versus brittle behavior of amorphous metals

Study of the Mixed Tensile-Shear Ductile Fracture of Impulsively Loaded Metal Plates by Developing a Phase-Field Fracture Model with Stress Triaxiality and Lode Parameter Dependence

An engineering model of fatigue crack growth under variable amplitude loading

Quantification of the Complex Crack Geometry Effect on Fracture Resistance Using Strain-Based Finite Element Damage Analysis

Statistical mechanical model for crack growth

A Hydromechanical Model for a Single Rock Fracture Subjected to Shearing

Shear Crack Propagation along Weak Planes in Solids: a Finite Deformation Analysis Incorporating the Linear Harmonic Potential

An Analytical Compressive-Shear Fracture Model Influenced by Thermally Treated Microcracks in Brittle Solids

Determination of Equivalent Crack Length for Voids in Metallic Alloys Based on Continuum Damage Mechanics Modeling

Static Shear Fracture Influenced by Historic Stresses Path and Crack Geometries in Brittle Solids

Modelling of dynamic behaviour of orthotropic metals including damage and failure

A damage mechanics model for quasi brittle materials based on the structured deformation theory

Quasi-Micromechanical Constitutive Theory for Brittle Damaged Materials under Tension

Mode I crack tip fields in amorphous materials with application to metallic glasses

A Microcrack Growth-Based Constitutive Model for Evaluating Transient Shear Properties During Brittle Creep of Rocks