Abstract:Extension twinning is not only a key plastic deformation mode of Mg and its alloys at room temperature (RT), but also introduces high density of dislocations and changes crystal orientation (texture) which exert considerable influence on precipitation strengthening and mechanical properties. Using tensile test, quasi-in-situ hardness test, optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), the effects of extension twinning on age-hardening, precipitation behavior and mechanical properties of an extruded AZ80 bar were investigated. Extension twins were introduced into the bar by cold compressed (H1) along extrusion direction (ED), and two kinds of aging treatments, i.e. ‘on-line quenching + aging’ (T5) and ‘on-line quenching + H1 + aging’ (T10), were conducted at 150 °C. We clarified that extension twinning can significantly accelerate precipitation kinetics. For T5 aging, there is an incubation stage in the first 15 h, and then the hardness increases continually and slowly in the following 35 h. By contrast, for T10 aging, softening is caused in the first 2.5 h, and then the hardness increases linearly until 20 h and remains stable in the next 30 h. Discontinuous precipitation is predominant in T5 aging; however, discontinuous precipitation is mostly inhibited in T10 aging and at the same time nano-sized continuous precipitates with high number density are formed in both extension twins and matrixes. Extension twins contains higher dislocation density and thus denser continuous precipitates than matrixes. Both and dislocations can be seen in extension twins and matrixes. Mechanical properties have been largely improved by extension twins. Particularly, after T10 the ED tensile yield strength (Rp0.2) remarkably increases from 144 MPa (H1) to 206 MPa, indicating that dense nano-sized continuous precipitates can effectively hinder twin-boundary migration during the detwinning. Moreover, T10 can obviously diminish the machinal property anisotropy as compared with T5.

Evading strength-corrosion tradeoff in Mg alloys via dense ultrafine twins

Achieving High Strength and Ductility in Magnesium Alloys via Densely Hierarchical Double Contraction Nanotwins

Realizing ultra-fine grains and ultra-high strength in conventionally extruded Mg-Ca-Al-Zn-Mn alloys: The multiple roles of nano-precipitations

Towards development of a high-strength stainless Mg alloy with Al-assisted growth of passive film

Effects of deformation twins on microstructure evolution, mechanical properties and corrosion behaviors in magnesium alloys - A review

Nanoscale coherent interface strengthening of Mg alloys

Study on the microstructure and mechanical properties of ZK60 magnesium alloy with submicron twins and precipitates obtained by room temperature multi-directional forging

Correlation between microstructure, tribology and corrosion behaviors of Mg-Al-Zn alloy via creating fine and uniform twins through submerged friction stir processing

Mechanistic investigation of a low-alloy Mg–Ca-based extrusion alloy with high strength–ductility synergy

Effect of twin assisted precipitation on the microstructure and mechanical properties of gradient structure Mg-Gd-Zn-Zr alloy

Effect of a bimodal grain structure on corrosion behavior and tensile properties of low-alloyed Mg-1Bi-1Zn-1Ag alloy

Towards extraordinary strength-ductility synergy in pure Mg via dislocation transmutation

Acquiring Mg-Ag microalloying TiB 2 /Al-4.5Cu composite simultaneously with ultrahigh strength and ductility via optimized salt-metal reaction and multistage heat treatment

Enhanced Precipitation Strengthening of Extruded Mg-8 Wt.%al-0.5 Wt.%zn (AZ80) Magnesium Alloy by Extension Twinning

Evading Strength-Ductility Tradeoff in Mg Alloy via Uniform Microstructure and Unique Texture Modification Induced by Moderate Temperature ECAP

Effect of High Mn Content on Development of Ultra-Fine Grain Extruded Magnesium Alloy

Engineering Atomic-to-Nano Scale Structural Homogeneity towards High Corrosion Resistance of Amorphous Magnesium-Based Alloys

A high-specific-strength and corrosion-resistant magnesium alloy

Synergistic grain boundary engineering for achieving strength-ductility balance in ultrafine-grained high-Cr-bearing multicomponent alloys

Influence of tensile twinning on electrochemical and corrosion behavior of Mg alloy

Maximizing precipitation hardening effect enables ultrahigh strength in a coarse-grained Mg-13Gd forging alloy