Abstract:In this work, a novel sol-gel coating of N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AAPTS)-silica was prepared for capillary microextraction (CME) of trace Cu, Zn, Ni, Hg and Cd followed by on-line ICP-MS detection. This organic-inorganic hybrid coating was in situ created on the inner walls of fused silica capillary using a sol solution containing tetramethoxysilane (TMOS) as a precursor, AAPTS as a co-precursor, ethanol as the solvent and cetyltrimethylammonium bromide (CTAB) as the template. The structure of the capillary coating was characterized by IR, SEM and TEM. Various experimental parameters affecting capillary microextraction of the target analytes have been investigated carefully, and the optimized extraction conditions were established. It was found that the AAPTS-silica coating with a terminal functional group of -NH-CH2-CH2-NH2 exhibited a high selectivity towards the selected metal ions. With a consumption of 1.0 mL sample solution and 80 microL eluent, the detection limits (3sigma) were found to be 1.8, 11.8, 1.1, 3.3 and 1.4 pg mL(-1) for Cu, Zn, Ni, Hg and Cd, respectively. A sampling frequency of 14 h(-1) and an enrichment factor of 12.5 were obtained under the optimized experimental conditions. The relative standard deviations (RSDs) for the target analytes were less than 3.6% (C = 1 ng mL(-1), n = 7, sample volume = 1 mL). Two certified reference materials of NIES No.10-c rice flour and BCR-CRM 278 mussel flesh were analyzed to validate the proposed method, and the determined values were in good agreement with the certified values. The developed method had also been applied to the determination of trace target elements in human hair, serum and urine, and the recoveries for the spiked samples were in the range of 89.2-101.8%. The AAPTS-silica coated capillary showed an excellent pH resistance and could be used for more than 120 times without decreasing adsorption efficiency.

CuCo2O4 as affective adsorbent for dispersive solid-phase extraction of lead from food, cigarette and water samples before FAAS detection

Covalent Organic Framework-Lzu1@pei@fe3o4-based Magnetic Dispersive Micro-Solid Phase Extraction of Tetracyclines from Environmental Water Prior to HPLC Analysis.

Dispersive Liquid–Liquid Microextraction and Micro-Solid Phase Extraction for the Rapid Determination of Metals in Food and Environmental Waters

Extraction and preconcentration of lead (II) in various water and food samples by orbital shaker-assisted magnetic solid phase extraction method using a new magnetic poly linoleic acid-polystyrene-PDMS block copolymer

Ultrasound assisted magnetic solid phase extraction of copper(II) and lead(II) in environmental samples on Magnetic Activated Carbon Cloth

Simple Magnetic Polymeric Ionic Liquid Nanocomposite Coated Hollow Fiber Membrane for the Determination of Lead (II) and Copper (II) in Water and Fruit Juice with Microinjection Sampling-Flame Atomic Absorption Spectrometry (MIS-FAAS)

Synthesis and Surface Modification of Iron Oxide Nanoparticles for the Extraction of Cadmium Ions in Food and Water Samples: A Chemometric Study

Determination of Cobalt (II), Copper (II), Lead (II), and Zinc (II) with Preconcentration by 8-Hydroxyquinoline-Coated Magnetic Nanoparticles (MNPs) and Microinjection Sampling–Flame Atomic Absorption Spectrometry (MIS–FAAS)

CoFe2O4–CoFe microspheres for simultaneous electrochemical determination of trace lead(II) and cadmium(II) ions

Solid phase extraction and trace monitoring of cadmium ions in environmental water and food samples based on modified magnetic nanoporous silica

Magnetic Adsorbent Decorated with Poly(N-Isopropylacrylamide) (PNIPAM) Brushes for the Vortex-Assisted Solid Phase Extraction (VASPE) of Lead in Water, Cigarettes and Soil with High-Resolution Continuum Source Flame Atomic Absorption Spectrometry (HR-CS FAAS) Detection

Functionalized nanodiamonds with NiCoFe layered double hydroxides used as a novel adsorbent in dispersive solid phase microextraction for Pb(II) determination in juice samples

Vortex‐Assisted Magnetic Solid‐Phase Extraction of Heavy Metals in Water and Food Samples Using Iron Oxide Nanoparticle‐Impregnated Carboxymethyl‐β‐Cyclodextrin

Environmentally friendly nanoflower Al2O3@carbon spheres as adsorbent for dispersive solid-phase microextraction of copper and lead in food and water samples

High Adsorption Performance for Trace Lead (II) Cation from Sewage by Fe/Cu Metal Organic Nanosheets Modified with Terephthalic Acid.

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite as an effective adsorbent for dispersive solid phase micro-extraction of cadmium in food and water samples

Preparation of melon peel biochar/CoFe2O4 as a new adsorbent for the separation and preconcentration of Cu(II), Cd(II), and Pb(II) ions by solid-phase extraction in water and vegetable samples

Determination of Lead, Copper, and Iron in Cosmetics, Water, Soil, and Food Using Polyhydroxybutyrate-B-polydimethyl Siloxane Preconcentration and Flame Atomic Absorption Spectrometry

Preparation of modified multiwalled carbon nanotubes (l-Arg-CS/MWCNTs-COOH/Fe3O4) as sorbent for dispersive solid phase extraction of Cu(II), Pb(II) and Cd(II) in wastewater samples

Chemically Modified Activated Carbon With 1-Acylthiosemicarbazide For Selective Solid-Phase Extraction And Preconcentration Of Trace Cu(Ii), Hg(Ii) And Pb(Ii) From Water Samples

Preparation of a high pH-resistant AAPTS-silica coating and its application to capillary microextraction (CME) of Cu, Zn, Ni, Hg and Cd from biological samples followed by on-line ICP-MS detection