Abstract:Niobium consumption has burgeoned owing to the increasing application of niobium in critical industries, including the aerospace and oil and gas industries. Conventional metallurgical technologies and separation methods for niobium extraction use highly concentrated HF, which is hazardous to both humans and the environment. A solvent extraction system comprising trioctyl tertiary amine (N235) and 4-methyl-2-pentanone (MIBK) that can extract and separate niobium from an oxalate-containing H2SO4 solution is proposed in this paper. Niobium solutions tend to contain titanium and iron impurities; therefore, the effects of various conditions on the separation of the three elements were investigated. The extraction mechanism and thermodynamics of the process were also examined. Over 82% niobium was extracted at an organic-to-aqueous phase ratio of 1:1 and the H+ concentration of 8.29 mol/L using an organic phase with 50 vol% N235 and 50 vol% MIBK as the extractants at 20 °C. Only 18.4% titanium and 3.35% iron were co-extracted. Two stripping processes, both of which further separated niobium and titanium, are also proposed herein. The possible composition of the niobium-containing extraction complex was [(R3NH)·NbO(C2O4)2(H2O)2], as supported by a Fourier transform infrared spectroscopy (FT-IR) analysis and ultraviolet–visible (UV–vis) spectrophotometry. The extraction mechanism was inferred to be the association of R3NH+ in N235 with the [NbO(C2O4)2(H2O)2]− from the acidic niobium-containing solution, and the stripping mechanism was concluded to be anion exchange. The enthalpy change (∆Ho) of the extraction system was −11.0 kJ/mol at 288.15–313.15 K, which indicated that niobium extraction from the H2SO4 solution with oxalate using N235 and MIBK was an irreversible exothermic process.

Separation of niobium from ferroniobium by chlorination

THE DISTILLATION OF MIXED CHLORIDES OBTAINED BY THE CHLORINATION OF FERRO- NIOBIUM

A New process for the separation of tantalum from niobium

Separation of niobium from chloride media by solvent extraction with dicyclohexyl-18-crown-6

Study on Separation of Niobium and Iron from Low Grade Niobium Ore

Separation and extraction of niobium from H2SO4 solution containing titanium and iron impurities

Thermodynamics of niobium chlorides and mixtures with alkali chlorides

Hydrometallurgical Separation of Niobium and Tantalum: A Fundamental Approach

Production of niobium powder by direct electrochemical reduction of solid Nb2O5 in a eutectic CaCl2-NaCl melt

Gravimetric determination of niobium in the intermediate products of metallic titanium manufacture by methyl-isobutyl-ketone extraction

Chemical Vapor Synthesis of Ultrafine Niobium Powder Via Sodiothermic Reduction of Chloride

Possible methodology for niobium, tantalum and scandium separation in ferrocolumbite

Selective Reduction of Niobium(V) Species to Promote Molecular Niobium/Tantalum Separation

A novel method for the separation of niobium and titanium from sulfuric acid-oxalate solutions using N235 and MIBK

Purification of niobium oxide by dissolution and solvent extraction

Production of Niobium Powder by Magnesiothermic Reduction of Feed Preform

Separation and isolation of tantalum and niobium from tantalite using solvent extraction and ion exchange

CONCOMITANT EXTRACTION PROCESS OF NIOBIUM AT THE TITANIUM TETRACHLORIDE PRODUCTION