Abstract:In the industrial low-temperature grain-oriented (LTGO) silicon steel normalized sheet, there are a certain number of fine equiaxed grains distributed along the rolling direction. However, the formation mode of the fine equiaxed grains and the influence of them on magnetic properties have not yet been well understood. In the present work, the above issues were investigated using field emission scanning electron microscopy (SEM), field emission transmission electron microscopy (TEM), X-ray diffraction (XRD), high temperature confocal scanning laser microscopy (HTCSLM), etc. It was found that (1) the fine equiaxed grains could be divided into many grain colonies according to grain orientation, and within each colony, the grain orientations were similar; (2) during normalizing, the fine equiaxed grains were mainly generated inside the elongated deformed grains which contained a large number of subgrains; (3) the amount of α → γ phase transformation during the normalizing was very small. Therefore, it can be inferred that the fine equiaxed grains were mainly produced by subgrain coalescence, rather than by phase transformation. Moreover, γ-grain (〈111〉 // ND) colonies with ideal grain size could be formed in the fine equiaxed grain regions after ideal normalizing process. Due to the heredity of microstructure and texture, γ-grain colonies, which can facilitate the formation of the precise Goss texture ({110} 〈001〉 ) during high-temperature annealing, were formed in the primary recrystallized matrix after cold rolling, decarburizing and nitriding, as a result, the magnetic properties of the final product were significantly improved. The present work can provide help to further improve the understandings of the microstructural evolution in the LTGO silicon steel normalized sheet and the influence of normalized microstructure on magnetic properties.

Research and development of a pilot continuous annealing and MgO coating line for grain-oriented silicon steel

The Research on Al-Si Coating for Hot Forming Steel

New Technology of Domestic High-Grade Non-Oriented Silicon Steel Annealing and Coating Furnace

Development of microstructure and texture in strip casting grain oriented silicon steel

Method for producing high magnetic induction orientation silicon steel with excellent magnetic performance and good bottom layer

Novel Process for the Formation of Goss Grains by Concentrated Shear Strain on Surface in Inhibitor-Free Silicon Steel

Study on Influence of Surface Coating During Cooling Slope Rheocasting Process

Fabrication of high-performance low silicon non-oriented electrical steels by a new method: Low-finishing-temperature hot rolling combined with batch annealing

Investigation of microstructure and texture as related to primary recrystallization of grain-oriented silicon steel

Effects of Two-Stage Cold Rolling Schedule on Microstructure and Texture Evolution of Strip Casting Grain-Oriented Silicon Steel with Extra-Low Carbon

Fabrication of Grain-Oriented Silicon Steel by a Novel Way: Strip Casting Process

Origin of fine equiaxed grains in industrial low-temperature grain-oriented silicon steel normalized sheet and their influence on magnetic properties

Component Design of Environmentally Friendly High-Temperature Resistance Coating for Oriented Silicon Steel and Effects on Anti-Corrosion Property

The Problems Of Coated Hearth Rolls In Continuous Annealing Furnace And Development Of A New Coating

Control of the Gas Flow in an Industrial Directional Solidification Furnace for Production of High Purity Multicrystalline Silicon Ingots

EFFECT OF COLD ROLLING PROCESS ON TEXTURE EVOLUTION OF GRADIENT MICROSTRUCTURE IN Fe-3,0 % Si NON-ORIENTED SILICON STEEL

Improved magnetic properties of grain-oriented silicon steel by in-situ formation of potassium zirconium phosphate in insulating coating

Coordinate regulation mechanism of primary recrystallization texture and microstructure of grain-oriented silicon steel

Complete Goss Secondary Recrystallization by Control of the Grain Size and Texture of Primary Recrystallization in Grain-Oriented Silicon Steel

The impact of niobium on the microstructure, texture and magnetic properties of strip-cast grain oriented silicon steel

Evolution of microstructure, texture and inhibitor along the processing route for grain-oriented electrical steels using strip casting