Abstract:Urea oxidation reaction (UOR) has been proposed to replace the formidable oxygen evolution reaction (OER) to reduce the energy consumption for producing hydrogen from electrolysis of water owing to its much lower thermodynamic oxidation potential compared to that of the OER. Therefore, exploring a highly efficient and stable hydrogen evolution and urea electrooxidation bifunctional catalyst is the key to achieve economical and efficient hydrogen production. In this paper, we report a heterostructured sulfide/phosphide catalyst (Ni3S2–Ni3P/NF) synthesized via one-step thermal treatment of Ni(OH)2/NF, which allows the simultaneous occurrence of phosphorization and sulfuration. The obtained Ni3S2–Ni3P/NF catalyst shows a sheet structure with an average sheet thickness of ∼100 nm, and this sheet is composed of interconnected Ni3S2 and Ni3P nanoparticles (∼20 nm), between which there are a large number of accessible interfaces of Ni3S2–Ni3P. Thus, the Ni3S2–Ni3P/NF exhibits superior performance for both UOR and hydrogen evolution reaction (HER). For the overall urea–water electrolysis, to achieve current densities of 10 and 100 mA cm–2, cell voltage of only 1.43 and 1.65 V is required using this catalyst as both the anode and the cathode. Moreover, this catalyst also maintains fairly excellent stability after a long-term testing, indicating its potential for efficient and energy-saving hydrogen production. The theoretical calculation results show that the Ni atoms at the interface are the most efficient catalytically active site for the HER, and the free energy of hydrogen adsorption is closest to thermal neutrality, which is only 0.16 eV. A self-driven electron transfer at the interface, making the Ni3S2 sides become electron donating while Ni3P sides become electron withdrawing, may be the reason for the enhancement of the UOR activity. Therefore, this work shows an easy treatment for enhancing the catalytic activity of Ni-based materials to achieve high-efficiency urea–water electrolysis.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04325?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04325</a>.Scanning electron microscope images, XRD analysis, XPS survey spectrum, electrical performance characterization, and theoretical calculations (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04325/suppl_file/am1c04325_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boosting hydrogen production via urea electrolysis on an amorphous nickel phosphide/graphene hybrid structure

Enhancing hydrogen generation through urea electro-oxidation on a bimetallic and dual-anionic NiFeSP/NF nanostructured electrode

Heterostructured Ni 3 S 2 –Ni 3 P/NF as a Bifunctional Catalyst for Overall Urea–Water Electrolysis for Hydrogen Generation

Carbon fiber confined mixed Ni‐based crystal phases with interfacial charge redistribution induced by high bond polarity for electrochemical urea‐assisted hydrogen generation

Coaxial Ni-S@N-Doped Carbon Nanofibers Derived Hierarchical Electrodes for Efficient H2 Production Via Urea Electrolysis.

High-performance Urea Electrolysis Towards Less Energy-Intensive Electrochemical Hydrogen Production Using a Bifunctional Catalyst Electrode

Improved hydrogen generation via a urea-assisted method over 3D hierarchical NiMo-based composite microrod arrays

In situ fabrication of transition metal phosphide tree-like nanostructure for energy-saving hydrogen production coupled via urea oxidation reaction

The Ni–P dual vacancies crystalline/amorphous bifunctional electrode with ZnO "electron pump" for urea-assisted electrolysis of water to produce hydrogen

Significantly Enhanced Energy-Saving H2 Production Coupled with Urea Oxidation by Low- and Non-Pt Anchored on NiS-Based Conductive Nanofibers

Interface engineering in Ni(OH) 2 /NiOOH heterojunction to enhance energy-efficient hydrogen production via urea electrolysis

Urea-oxidation-assisted electrochemical water splitting for hydrogen production on a bifunctional heterostructure transition metal phosphides combining metal–organic frameworks

Co-doped MnS/NiS/Ni3S2 in situ grown on hydrophilic nickel foam for energy-efficient urea-assisted alkaline hydrogen production

Ni3S2/MWCNTs/NF Hybrid Nanostructure As Effective Bifunctional Electrocatalysts for Urea Electrolysis Assisted Hydrogen Evolution

Hollow NiMo-based Nitride Heterojunction with Super-Hydrophilic/aerophobic Surface for Efficient Urea-Assisted Hydrogen Production

Modulating the electronic structure of Ni(OH)2 by coupling with low-content Pt for boosting urea oxidation reaction enables significantly promoted energy-saving hydrogen production

Coupling of NiFe Layered Double Hydroxides with Sulfides for Highly Efficient Urea Electrolysis and Hydrogen Evolution

Electrochemically Induced Cu-NiOOH/Cu2O/Cu Mesh Heteroarchitecture with Cu-Ni Dual Active Sites As Efficient Bifunctional Electrocatalyst for Urea-Assisted Energy-Saving Hydrogen Production in Alkaline Electrolyte

Ni2P nanocrystals embedded Ni-MOF nanosheets supported on nickel foam as bifunctional electrocatalyst for urea electrolysis

Self-Supported Nickel Phosphide Electrode for Efficient Alkaline Water-to-Hydrogen Conversion Via Urea Electrolysis

Enhanced hydrogen production via urea electrolysis over Ni-NiO electrodeposited on Ti mesh