Abstract:Urea oxidation reaction (UOR) has been proposed to replace the formidable oxygen evolution reaction (OER) to reduce the energy consumption for producing hydrogen from electrolysis of water owing to its much lower thermodynamic oxidation potential compared to that of the OER. Therefore, exploring a highly efficient and stable hydrogen evolution and urea electrooxidation bifunctional catalyst is the key to achieve economical and efficient hydrogen production. In this paper, we report a heterostructured sulfide/phosphide catalyst (Ni3S2–Ni3P/NF) synthesized via one-step thermal treatment of Ni(OH)2/NF, which allows the simultaneous occurrence of phosphorization and sulfuration. The obtained Ni3S2–Ni3P/NF catalyst shows a sheet structure with an average sheet thickness of ∼100 nm, and this sheet is composed of interconnected Ni3S2 and Ni3P nanoparticles (∼20 nm), between which there are a large number of accessible interfaces of Ni3S2–Ni3P. Thus, the Ni3S2–Ni3P/NF exhibits superior performance for both UOR and hydrogen evolution reaction (HER). For the overall urea–water electrolysis, to achieve current densities of 10 and 100 mA cm–2, cell voltage of only 1.43 and 1.65 V is required using this catalyst as both the anode and the cathode. Moreover, this catalyst also maintains fairly excellent stability after a long-term testing, indicating its potential for efficient and energy-saving hydrogen production. The theoretical calculation results show that the Ni atoms at the interface are the most efficient catalytically active site for the HER, and the free energy of hydrogen adsorption is closest to thermal neutrality, which is only 0.16 eV. A self-driven electron transfer at the interface, making the Ni3S2 sides become electron donating while Ni3P sides become electron withdrawing, may be the reason for the enhancement of the UOR activity. Therefore, this work shows an easy treatment for enhancing the catalytic activity of Ni-based materials to achieve high-efficiency urea–water electrolysis.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04325?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04325</a>.Scanning electron microscope images, XRD analysis, XPS survey spectrum, electrical performance characterization, and theoretical calculations (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04325/suppl_file/am1c04325_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ni3S2/MWCNTs/NF Hybrid Nanostructure As Effective Bifunctional Electrocatalysts for Urea Electrolysis Assisted Hydrogen Evolution

Anion Modulate the Morphological and Electronic Structure of NiFe-based Electrocatalyst for Efficient Urea Oxidation-Assisted Water Electrolysis

Heterostructured Ni 3 S 2 –Ni 3 P/NF as a Bifunctional Catalyst for Overall Urea–Water Electrolysis for Hydrogen Generation

Porous Flower-Like Nickel Nitride As Highly Efficient Bifunctional Electrocatalysts for Less Energy-Intensive Hydrogen Evolution and Urea Oxidation

Electrochemically Induced Cu-NiOOH/Cu2O/Cu Mesh Heteroarchitecture with Cu-Ni Dual Active Sites As Efficient Bifunctional Electrocatalyst for Urea-Assisted Energy-Saving Hydrogen Production in Alkaline Electrolyte

Hierarchical Ni3N/Ni0.2Mo0.8N Heterostructure Nanorods Arrays As Efficient Electrocatalysts for Overall Water and Urea Electrolysis

Co-doped MnS/NiS/Ni3S2 in situ grown on hydrophilic nickel foam for energy-efficient urea-assisted alkaline hydrogen production

Significantly Enhanced Energy-Saving H2 Production Coupled with Urea Oxidation by Low- and Non-Pt Anchored on NiS-Based Conductive Nanofibers

NiS/MoS2 Mott-Schottky heterojunction-induced local charge redistribution for high-efficiency urea-assisted energy-saving hydrogen production

Synthesis of non-noble NiMoO4–Ni(OH)2/NF bifunctional electrocatalyst and its application in water-urea electrolysis

Nickel Hydroxysulfide Electrocatalyst Promotes Urea Oxidation for Energy‐Saving Hydrogen Production

P-NiFe2O4/N-Doped Carbon Nanotubes/NiFe Multi-Phase Heterojunctions for Overall Water Splitting and Urea Electrolysis

The Ni–P dual vacancies crystalline/amorphous bifunctional electrode with ZnO "electron pump" for urea-assisted electrolysis of water to produce hydrogen

Modulating the electronic structure of Ni(OH)2 by coupling with low-content Pt for boosting urea oxidation reaction enables significantly promoted energy-saving hydrogen production

Urea-oxidation-assisted electrochemical water splitting for hydrogen production on a bifunctional heterostructure transition metal phosphides combining metal–organic frameworks

Enhancing hydrogen generation through urea electro-oxidation on a bimetallic and dual-anionic NiFeSP/NF nanostructured electrode

Low-Cost Ni2P/Ni0.96S Heterostructured Bifunctional Electrocatalyst toward Highly Efficient Overall Urea-Water Electrolysis

In Situ Construction of Nickel Sulfide Nano-Heterostructures for Highly Efficient Overall Urea Electrolysis

Ni–Mo–O nanorod-derived composite catalysts for efficient alkaline water-to-hydrogen conversion via urea electrolysis

Coupling of NiFe Layered Double Hydroxides with Sulfides for Highly Efficient Urea Electrolysis and Hydrogen Evolution

Heterogeneous Ni-MoN nanosheet-assembled microspheres for urea-assisted hydrogen production