Abstract:Urea oxidation reaction (UOR) has been proposed to replace the formidable oxygen evolution reaction (OER) to reduce the energy consumption for producing hydrogen from electrolysis of water owing to its much lower thermodynamic oxidation potential compared to that of the OER. Therefore, exploring a highly efficient and stable hydrogen evolution and urea electrooxidation bifunctional catalyst is the key to achieve economical and efficient hydrogen production. In this paper, we report a heterostructured sulfide/phosphide catalyst (Ni3S2–Ni3P/NF) synthesized via one-step thermal treatment of Ni(OH)2/NF, which allows the simultaneous occurrence of phosphorization and sulfuration. The obtained Ni3S2–Ni3P/NF catalyst shows a sheet structure with an average sheet thickness of ∼100 nm, and this sheet is composed of interconnected Ni3S2 and Ni3P nanoparticles (∼20 nm), between which there are a large number of accessible interfaces of Ni3S2–Ni3P. Thus, the Ni3S2–Ni3P/NF exhibits superior performance for both UOR and hydrogen evolution reaction (HER). For the overall urea–water electrolysis, to achieve current densities of 10 and 100 mA cm–2, cell voltage of only 1.43 and 1.65 V is required using this catalyst as both the anode and the cathode. Moreover, this catalyst also maintains fairly excellent stability after a long-term testing, indicating its potential for efficient and energy-saving hydrogen production. The theoretical calculation results show that the Ni atoms at the interface are the most efficient catalytically active site for the HER, and the free energy of hydrogen adsorption is closest to thermal neutrality, which is only 0.16 eV. A self-driven electron transfer at the interface, making the Ni3S2 sides become electron donating while Ni3P sides become electron withdrawing, may be the reason for the enhancement of the UOR activity. Therefore, this work shows an easy treatment for enhancing the catalytic activity of Ni-based materials to achieve high-efficiency urea–water electrolysis.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04325?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04325</a>.Scanning electron microscope images, XRD analysis, XPS survey spectrum, electrical performance characterization, and theoretical calculations (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04325/suppl_file/am1c04325_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Self-Supported Nickel Phosphide Electrode for Efficient Alkaline Water-to-Hydrogen Conversion Via Urea Electrolysis

Anion Modulate the Morphological and Electronic Structure of NiFe-based Electrocatalyst for Efficient Urea Oxidation-Assisted Water Electrolysis

Co-doped MnS/NiS/Ni3S2 in situ grown on hydrophilic nickel foam for energy-efficient urea-assisted alkaline hydrogen production

Hierarchical Ni3N/Ni0.2Mo0.8N Heterostructure Nanorods Arrays As Efficient Electrocatalysts for Overall Water and Urea Electrolysis

Nitrogen doped carbon fiber supported nickel phosphide for efficient electrocatalytic overall urea splitting

Heterostructured Ni 3 S 2 –Ni 3 P/NF as a Bifunctional Catalyst for Overall Urea–Water Electrolysis for Hydrogen Generation

Oxygen‐Incorporated NiMoP Nanotube Arrays as Efficient Bifunctional Electrocatalysts For Urea‐Assisted Energy‐Saving Hydrogen Production in Alkaline Electrolyte

Low-Cost Ni2P/Ni0.96S Heterostructured Bifunctional Electrocatalyst toward Highly Efficient Overall Urea-Water Electrolysis

Significantly Enhanced Energy-Saving H2 Production Coupled with Urea Oxidation by Low- and Non-Pt Anchored on NiS-Based Conductive Nanofibers

Enhancing hydrogen generation through urea electro-oxidation on a bimetallic and dual-anionic NiFeSP/NF nanostructured electrode

Self-Supported Bimetallic Phosphide Heterojunction-Integrated Electrode Promoting High-Performance Alkaline Anion-Exchange Membrane Water Electrolysis

Bifunctional and Self-Supported NiFeP-Layer-Coated NiP Rods for Electrochemical Water Splitting in Alkaline Solution

Urea-oxidation-assisted electrochemical water splitting for hydrogen production on a bifunctional heterostructure transition metal phosphides combining metal–organic frameworks

Self-supported amorphous phosphide catalytic electrodes for electrochemical hydrogen production coupling with methanol upgrading

PEO-PPO-PEO induced holey NiFe-LDH nanosheets on Ni foam for efficient overall water-splitting and urea electrolysis

Porous Flower-Like Nickel Nitride As Highly Efficient Bifunctional Electrocatalysts for Less Energy-Intensive Hydrogen Evolution and Urea Oxidation

Efficient electrocatalyst for solar-driven electrolytic water splitting: Phosphorus (P) and niobium (Nb) co-doped NiFe 2 O 4 nanosheet

Ni3S2/MWCNTs/NF Hybrid Nanostructure As Effective Bifunctional Electrocatalysts for Urea Electrolysis Assisted Hydrogen Evolution

Ni–Mo–O nanorod-derived composite catalysts for efficient alkaline water-to-hydrogen conversion via urea electrolysis

NiFe Hydroxide Supported on Hierarchically Porous Nickel Mesh As a High-Performance Bifunctional Electrocatalyst for Water Splitting at Large Current Density

Highly-dispersed 2D NiFeP/CoP heterojunction trifunctional catalyst for efficient electrolysis of water and urea