Abstract:Fracture mechanics is crucial for many fields of engineering, as precisely predicting failure of structures and parts is required for efficient designs. The simulation of failure processes is, from a mechanical and a numerical point of view, challenging, especially for inhomogeneous materials, where the microstructure influences crack initiation and propagation and leads to complex crack patterns. The phase field method for fracture is a promising approach to encounter such materials since it is able to describe complex fracture phenomena like crack kinking, branching and coalescence. Moreover, it is a largely mesh independent approach, given that the mesh is homogenous around the crack. However, the broadly used formulation of the phase field method is limited to isotropic materials and does not account for preferable fracture planes defined through the material's microstructure. In this work, the method is expanded to take orthotropic constitutive behavior and preferable directions of crack propagation into account. We show that by using a stress-based split and multiple phase field variables with preferable fracture planes, in combination with a hybrid phase field approach, a general framework can be found for simulating anisotropic, inhomogeneous materials. The stress-based split is based on fictitious crack faces and is, herein, expanded to anisotropic materials. Furthermore, a novel hybrid approach is used, where the degradation of the sound material is performed based on a smooth traction free crack boundary condition, which proves to be the main driving factor for recovering observed crack patterns. This is shown by means of a detailed analysis of two examples: a wooden single edge notched plate and a wood board with a single knot and complex fiber directions. In both cases, the proposed novel hybrid phase field approach can realistically reproduce complex failure modes.

Failure modes and effective strength of two-phase materials determined by means of numerical limit analysis

Micro Failure Analysis of Fiber Metal Laminates

Progressive failure analysis of 2D woven composites at the meso-micro scale

A Phase-Field Framework for Modeling Multiple Cohesive Fracture Behaviors in Laminated Composite Materials

Phase field modeling for composite material failure

Numerical Limit and Shakedown Analysis Method for Kinematic Hardening Structure Made of Arbitrary Inhomogeneous Material

Some basic problems in numerically simulating effective properties and local fields of composite materials

A double-phase field model for multiple failures in composites

Failure Modes of a Laminated Composite With Complaint Interlayers

A hybrid multi-phase field model to describe cohesive failure in orthotropic materials, assessed by modeling failure mechanisms in wood

A minimalistic approach to simulate multiple failure mechanisms of metal matrix fiber-reinforced composites by the phase field and cohesive zone models

Multi-scale FE 2 investigation of non linear rate dependent 3D composite structures accounting for fiber–matrix damage

Limit analysis of ductile composites based on homogenization theory

Analytical modeling of fiber–matrix interface failure in unidirectional laminae subjected to in-plane shear loads

Incorporating point cloud failure criterion in an orthotropic visco-elastic-plastic material model

A finite element based approach for nonlocal stress analysis for multi-phase materials and composites

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

2-D Mesoscopic Simulation of Two-Phase Materials Containing Microinclusions.

Numerical Study on Crack Propagation in Linear Elastic Multiphase Composite Materials Using Phase Field Method

Three-phase plane composites of minimal elastic stress energy: High-porosity structures

An efficient micromechanics-based finite element model for failure analysis of laminated composites