Abstract:This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391-1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre-matrix concentric cylinder model is extended to fibre and (N-1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1-48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1572). This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'.

Incorporating point cloud failure criterion in an orthotropic visco-elastic-plastic material model

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

On point cloud failure criterion predictions

Finite Element Analysis of a Modified Progressive Damage Model for Composite Laminates under Low-Velocity Impact

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

Meso-Scale Damage Modeling of Hybrid 3D Woven Orthogonal Composites under Uni-Axial Compression

Point Cloud Failure Criterion for Composites using k-Nearest Neighbor Classification

A Dynamic Constitutive Model for Fiber-Reinforced Composite under Impact Loading

An efficient micromechanics-based finite element model for failure analysis of laminated composites

A Novel Integrated Modeling Strategy for Predicting Damage Mechanisms and Energy Dissipation of Composite Stiffened Structures under Low-Velocity Impact and Compression

A Nonlocal Finite Element Model for Progressive Failure Analysis of Composite Laminates

An interactive orthotropic non-local damage model for progressive failure analysis of composite laminates

Computational Micromechanics-Based Prediction of the Failure of Unidirectional Composite Lamina Subjected to Transverse and In-Plane Shear Stress States

Modelling Distinct Failure Mechanisms in Composite Materials by a Combined Phase Field Method

Finite element analysis of dynamic progressive failure of carbon fiber composite laminates under low velocity impact

Assessment of Failure Criteria and Damage Evolution Methods for Composite Laminates under Low-Velocity Impact

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach

Failure Analysis of Composite Laminate under Low-Velocity Impact Based on Micromechanics of Failure

An Explicit–implicit Combined Model for Predicting Residual Strength of Composite Cylinders Subjected to Low Velocity Impact

Adaptive Phase-Field Modeling of Dynamic Brittle Fracture in Composite Materials

Modeling of Crack Bridging and Failure in Heterogeneous Composite Materials: A Damage-Plastic Multiphase Model