Abstract:An analytical model is developed to predict the impact characteristic parameters of composite cylindrical shells when low-velocity penetration and non-penetration damage are considered. The critical impact velocity criterion for judging the penetrating failure of such structures is also proposed. The impact contact force, displacement, and load-displacement curve of the structure subjected to oblique non-penetrating impact loading are solved using the improved Hertz contact theory, cumulative damage theory, stiffness degradation method, etc. Based on the formula derivation of critical impact velocity, the key impact parameters are solved, such as the residual velocity of the projectile and damage area of the structure with penetrating impact, which takes into account three energy absorption mechanisms, such as delamination, laminating crushing and linear momentum transfer. A series of non-penetrating and penetrating impact tests are conducted using a low-velocity drop hammer rig and a light gas gun. The prediction results of the proposed model are compared to both experimental and literature results. One can find out that the largest prediction errors of the peaks of impact contact force and displacement deformation are 12.3 and 9.2 %, respectively, and the counterparts of residual velocity and damage area are 12.0 and 6.2 %, respectively. Hence, the present model is trustworthy for predicting these impact parameters. Moreover, it is advised to adopt an appropriate stacking sequence, a high ratio of structural thickness to radius, a large oblique impact angle of the projectile, and a small mass ratio of the projectile to such a structure to enhance its impact resistance or reduce impact response. In addition, it is worth noting that the current model probably has a big prediction error of the high-velocity impact behaviors involving the material heating and soft effects caused by penetration damage since high strain rate and temperature effects are not considered.

Prediction of Load-Bearing Capacity of Composite Parts with Low-Velocity Impact Damage: Identification of Intra- and Inter-Ply Constitutive Models

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

A Progressive Damage Model of Composite Laminates under Low-Velocity Impact

Finite Element Analysis of a Modified Progressive Damage Model for Composite Laminates under Low-Velocity Impact

Numerical Investigation on the Repeated Low-Velocity Impact Behavior of Composite Laminates

A Novel Integrated Modeling Strategy for Predicting Damage Mechanisms and Energy Dissipation of Composite Stiffened Structures under Low-Velocity Impact and Compression

High Velocity Impact Response of 3D Hybrid Woven Composites

Low-velocity Impact Damage Analysis in Composite Laminates

Exploration of Several Influence Factors of Low-Velocity Impact Damage on Composite Laminates

A Dynamic Constitutive Model for Fiber-Reinforced Composite under Impact Loading

An Explicit–implicit Combined Model for Predicting Residual Strength of Composite Cylinders Subjected to Low Velocity Impact

Prediction of Low-Velocity Impact Mechanical Response and Damage in Thermoplastic Composites Considering Elastoplastic Behavior

Rapid Prediction of Compression after Impact Properties of Composite Structures: an Equivalent Strategy for Impact Damage

A Progressive Damage Model for unidirectional Fibre Reinforced Composites with Application to Impact and Penetration Simulation

Predicting Post-Impact Compression Strength of Composite Laminates under Multiple Low-Velocity Impacts

Analytical modeling and analysis of the low-velocity penetration and non-penetration behaviors of fiber-reinforced composite cylindrical shells based on critical impact velocity criterion

Predicting Damage Behaviors of Composite Laminates under Multiple Low‐velocity Impacts

The Simulation of Low-Velocity Impact on Composite Laminates with the Damage Model Based on Strain

A Fast and Efficient Numerical Prediction of Compression after Impact (CAI) Strength of Composite Laminates and Structures

Progressive Failure Numerical Simulation and Experimental Verification of Carbon-Fiber Composite Corrugated Beams under Dynamic Impact

Delamination prediction in composite laminates under low-velocity impact