Abstract:Improved operational flexibility of gas turbines can play a major role in stabilising the electric power grid, by backing up intermittent renewable power. Gas turbines offer on-demand power and fast dispatch of power that is vital when renewable power reduces. This has brought about increasing demand to improve the ramp-up rate of gas turbines. One approach is through the injection of compressed air from energy storage or an auxiliary compressor. This method is the focus of the present work, which shows for the first time, the implications and limits of compressor air injection in a high-fidelity Computational Fluid Dynamics model (CFD). The 3D multi-stage model of the compressor was developed in ANSYS CFX v19.2, while the boundary conditions related to the injection cases have been obtained from a corresponding 0D engine model. The upper limits to air injection determine how much air can be injected into the engine, providing indicative values of power augmentation and ramp-up rate capabilities. These have been previously addressed by the authors using 0D models that do not consider the compressor aerodynamics in great detail. The CFD study has shown that for power augmentation, 16% of compressed air (based on compressor exit) is allowed based on the onset of stall. It also shows that increasing air injection amplifies losses, blockage factor and absolute velocity angle. Also, about 30% of the blade span from the hub is dominated by a rise in the total pressure loss coefficient, except the outlet guide vane for which separation occurs at the tip. For the ramp-up rate analysis, up to 10% air injection is shown to be sustainable. The work shows that the improvements in the 0D analytical engine model are plausible, in addition to demonstrating similar limits at different ambient temperatures.

The Design, Selection, and Application of Oil-Injected Screw Compressors for Fuel Gas Service

Experimental Investigation of the Water–injected Process-Gas Screw Compressor

Experimental Study of the Oil Injection Screw Air Compressor

Experimental Study on the Indicating Diagram of an Oil-Injected Twin Screw Compressor

Experimental Investigation into the Effect of Oil Injection on the Performance of a Variable Speed Twin-Screw Compressor

Performance Study on a Single-Screw Compressor for a Portable Natural Gas Liquefaction Process

Analysis of the Working Process in an Oil-Flooded Screw Compressor by Means of an Indicator Diagram

Experimental Study on Influence of Oil Injection on Performance of Screw Compressor with Variable Speed

Study of Oil-Injected Screw Compressors and Its Application

Development and Research on a Hermetic Horizontal Oil-Injected Scroll Compressor for Recovering Casing Gas

Aerodynamic limits air injection for heavy-duty gas turbine: Compressor aerodynamic limits for power augmentation and ramp-up capabilities

Optimal Design of Rotary Compressor Oriented to End-Plate Gas Injection with Check Valve

Design of Super Critical CO2 Injection Compressor

Study on the Performance of the Boil-off Gas Twin-Screw Compressor Based on the Thermal-Fluid-structure Coupling Method

Effect of Liquid Injection and Inner Compression Pressure on Design of Discharge Port of Single Screw Compressors

Study on the Selection of Single-Screw Steam Compressors in Industrial Steam Supply

An Enhanced Rotary Compressor with Gas Injection Through a Novel End-Plate Injection Structure

Optimization of refrigeration system with gas-injected scroll compressor

Numerical Investigation on Mass and Heat Transfer in an Ammonia Oil-Free Twin-Screw Compressor with Liquid Injection

Analysis of Performance of Two-Stage Screw Compressor under Various Operating Conditions

Experimental Study on the Influencing Factors of Thermal Performance of an Oil-injected Single Screw Compressor