Abstract:This study presents an experimental dataset documenting the evolution of a turbulent boundary layer downstream of a rough-to-smooth surface transition. To investigate the effect of upstream flow conditions, two groups of experiments are conducted. For the \emph{Group-Re} cases, a nominally constant viscous-scaled equivalent sand grain roughness $k_{s0}^+\approx160$ is maintained on the rough surface, while the friction Reynolds number $Re_{\tau 0}$ ranges from 7100 to 21000. For the \emph{Group-ks} cases, $Re_{\tau 0}\approx14000$ is maintained while $k_{s0}^+$ ranges from 111 to 228. The wall-shear stress on the downstream smooth surface is measured directly using oil-film interferometry to redress previously reported uncertainties in the skin-friction coefficient recovery trends. In the early development following the roughness transition, the flow in the internal layer is not in equilibrium with the wall-shear stress. This conflicts with the common practise of modelling the mean velocity profile as two log laws below and above the internal layer height, as first proposed by Elliott (\textit{Trans. Am. Geophys. Union}, vol. 39, 1958, pp 1048--1054). As a solution to this, the current data are used to model the recovering mean velocity semi-empirically by blending the corresponding rough-wall and smooth-wall profiles. The over-energised large-scale motions leave a strong footprint in the near-wall region of the energy spectrum, the frequency and magnitude of which exhibit dependence on $Re_{\tau 0}$ and $k_{s0}^+$ respectively. The energy distribution in near-wall small scales is mostly unaffected by the presence of the outer flow with rough-wall characteristics, which can be used as a surrogate measure to extract the local friction velocity.

A New Low-Reynolds-Number k-ε Model for Turbulent Flow Over Smooth and Rough Surfaces

A Mixed-Time-scale Low-Reynolds-number One-Equation Turbulence Model

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

AN EXTENDED K-Ε MODEL FOR NUMERICAL SIMULATION OF WIND FLOW AROUND BUILDINGS

Numerical and Experimental Analysis of Shallow Turbulent Flow over Complex Roughness Beds

Prediction of Turbulent Flow Over a Flat Plate With a Step Change From a Smooth to a Rough Surface Using a Near-Wall RANS Model

On predictive models for the equivalent sand grain roughness for wall-bounded turbulent flows

Model of Interfacial Term in Turbulent Kinetic Energy Equation and Computation of Dissipation Rate for Particle-Laden Flows

Experimental study of a turbulent boundary layer with a rough-to-smooth change in surface conditions at high Reynolds numbers

New expressions for the surface roughness length and displacement height in the atmospheric boundary layer

Modeling rough walls from surface topography to double averaged Navier-Stokes computation

The effects of rough surfaces on heat transfer and flow structures for turbulent round jet impingement

Improved K-Ω-γ Transition Model Considering Distributed Surface Roughness

The wind-shade roughness model for turbulent wall-bounded flows

Mixed analytical/numerical method for low-Reynolds-number k-ε turbulence models

Mixed Analytical/Numerical Method for Low-Reynolds-Number K-Epsilon Turbulence Models

Hexagonal roughness characterization in turbulent flow

Improved k-omega-gamma transition model considering distributed surface roughness

Initial Study of a Theoretical Near-Wall Turbulence Model

Mixed analytical / numerical method applied to the low Reynolds number k-epsilon turbulence model

Scaling of Rough-Wall Turbulence by the Roughness Height and Steepness