Abstract:We examine the effect of varying roughness-element aspect ratio on the mean velocity distributions of turbulent flow over arrays of rectangular-prism-shaped elements. Large-eddy simulations (LES) in conjunction with a sharp-interface immersed boundary method are used to simulate spatially-growing turbulent boundary layers over these rough surfaces. Arrays of aligned and staggered rectangular roughness elements with aspect ratio >1 are considered. First the temporally- and spatially-averaged velocity profiles are used to illustrate the aspect-ratio effects. For aligned prisms, the roughness length (zo$$z_\mathrm{o}$$) and the friction velocity (u∗$$u_*$$) increase initially with an increase in the roughness-element aspect ratio, until the values reach a plateau at a particular aspect ratio. The exact value of this aspect ratio depends on the coverage density. Further increase in the aspect ratio changes neither zo$$z_\mathrm{o}$$, u∗$$u_*$$ nor the bulk flow above the roughness elements. For the staggered cases, zo$$z_\mathrm{o}$$ and u∗$$u_*$$ continue to increase for the surface coverage density and the aspect ratios investigated. To model the flow response to variations in roughness aspect ratio, we turn to a previously developed phenomenological volumetric sheltering model (Yang et al., in J Fluid Mech 789:127–165, 2016), which was intended for low to moderate aspect-ratio roughness elements. Here, we extend this model to account for high aspect-ratio roughness elements. We find that for aligned cases, the model predicts strong mutual sheltering among the roughness elements, while the effect is much weaker for staggered cases. The model-predicted zo$$z_\mathrm{o}$$ and u∗$$u_*$$ agree well with the LES results. Results show that the model, which takes explicit account of the mutual sheltering effects, provides a rapid and reliable prediction method of roughness effects in turbulent boundary-layer flows over arrays of rectangular-prism roughness elements.

The wind-shade roughness model for turbulent wall-bounded flows

Direct Numerical Simulation of Channel Flow with Real Surface Roughness Using a Ghost Cell Immersed Boundary Method

New expressions for the surface roughness length and displacement height in the atmospheric boundary layer

Hexagonal roughness characterization in turbulent flow

Prediction of Turbulent Flow Over a Flat Plate With a Step Change From a Smooth to a Rough Surface Using a Near-Wall RANS Model

On predictive models for the equivalent sand grain roughness for wall-bounded turbulent flows

Modeling rough walls from surface topography to double averaged Navier-Stokes computation

On the Mean Flow Behaviour in the Presence of Regional-Scale Surface Roughness Heterogeneity

Towards a new roughness parametrization through the effective distribution function

Numerical and Experimental Analysis of Shallow Turbulent Flow over Complex Roughness Beds

A New Low-Reynolds-Number k-ε Model for Turbulent Flow Over Smooth and Rough Surfaces

Experimental study of a turbulent boundary layer with a rough-to-smooth change in surface conditions at high Reynolds numbers

Numerical simulation of surface roughness effect on wind turbine thick airfoils

Modeling of Surface Roughness Effects on Bypass and Laminar Separation Bubble-Induced Transition for Turbomachinery Flows

Rough surfaces in under-explored surface morphology space and their implications on roughness modelling

Aerodynamic Properties of Rough Surfaces with High Aspect-Ratio Roughness Elements: Effect of Aspect Ratio and Arrangements

An assessment of effective slope as a parameter for turbulent drag prediction over multi-scaled roughness

Effects of Simulated Surface Roughness on Flow Characteristics in Symmetrical Airfoil

Hydrodynamic roughness induced by a multiscale topography

A multi-state description of roughness effects in turbulent pipe flow

Direct numerical simulation of open-channel flow over a fully-rough wall at moderate relative submergence