Abstract:Concerning the micro-scale deformation of titanium metal sheets, the number of grains in the sheet thickness direction decreases, and their formability exhibits a strong grain size sensitivity. Meanwhile, the twinning-induced dynamic recrystallization (TDRX) associated with grain size significantly affects the fracture behavior in the microforming of titanium sheets. Therefore, an accurate prediction of formability to improve manufacturing reliability remains challenging in the microforming of miniaturized titanium components. To address this issue, an in-depth understanding of the grain size-dependent TDRX behavior and its role in damage and fracture development in the microforming of alpha-titanium sheets is critical, and a coupled cellular automata-crystal plasticity (CA-CP) modeling framework was thus developed as an approach providing efficient solutions and insightful comprehensions of the issue. For the proposed modeling framework, a kinematic model for TDRX was established and integrated into the CP model by the CA algorithm. As a result, the microstructure evolution caused by TDRX was regarded as an intrinsic part of the constitutive behavior to connect heterogeneous plastic deformation and damage evolution through data transmission between the CP model and the CA algorithm. Additionally, the coupled CA-CP modeling framework was validated with the internal defect morphologies and deformation microstructures characterized by X-ray computed tomography (X-CT) and electron backscattered diffraction (EBSD). Experiment and simulation results demonstrated that the fine recrystallized (DRXed) grains were generated after the twin fragmentation when the dislocation density at twin boundaries reached a threshold of 9.2 x 10(13) /m(2). After TDRX, the dislocation density and the stress concentration intensity in recrystallization regions were revealed to decrease, accounting for the ductility improvement. Nevertheless, the dislocation density at twin boundaries was determined to decrease with the increase of grain size, leading to less twin fragmentation and the absence of TDRX. The uncoordinated deformation between fine DRXed grains motivated defects to grow spherically into microvoids, thereby preventing premature intergranular cracks along twins/grain boundaries. Ultimately, the deformation microstructures resulting from TDRX with the decrease of grain size were confirmed to control the brittle to ductile fracture transition of alpha-titanium sheets. The presented modeling framework and simulation procedure were validated to be able to predict the material integrity affected by crystalline microstructure in the deformation of titanium metal sheets.

Defect Occurrence and Modeling for the Thermomechanical Processing of Aerospace Alloys

Hierarchical Deformation and Anisotropic Behavior of (α+β) Ti Alloys: A Microstructure-Informed Multiscale Constitutive Model Study

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

Modeling the evolution of representative dislocation structures under high thermo-mechanical conditions during Additive Manufacturing of Alloys

Discovering the role of the defect morphology and microstructure on the deformation behavior of additive manufactured Ti–6Al–4V

Development of a model for simulation of micro-twin and corresponding asymmetry in high temperature deformation behavior of nickel-based superalloy single crystals using crystal plasticity-based framework

A multiscale constitutive model for metal forming of dual phase titanium alloys by incorporating inherent deformation and failure mechanisms

Analysing the Interaction between Microscopic Deformation, Microstructure and Void Evolution of Near-α Titanium Alloys during Non-Superplastic Hot Deformation by an Integrated Crystal Plasticity Finite Element Model

3D numerical modeling for thermo-mechanical behavior of additively manufactured titanium alloy parts with process-induced defects

Modelling of dynamic behaviour of orthotropic metals including damage and failure

Modeling of Processing-Induced Pore Morphology in an Additively-Manufactured Ti-6Al-4V Alloy

Comparative Study of Two Multiscale Thermomechanical Models of Polycrystalline Shape Memory alloys: Application to a Representative volume Element of Titanium-Niobium

Microstructural Evolution in a 6060 Extrudable Al-Alloy: Integrated Modeling and Experimental Validation

Coupled Cellular Automata-Crystal Plasticity Modeling of Microstructure-Sensitive Damage and Fracture Behaviors in Deformation of Α-Titanium Sheets Affected by Grain Size

Sensitivity of Heterogeneous Microstructure Evolution and Preferential Variant Selection to Thermomechanical Conditions in a Near Α Titanium Alloy

Recent progress in the simulation of microstructure evolution in titanium alloys

The Effects of Microstructure and Microtexture Generated During Solidification on Deformation Micromechanism in IN713C Nickel-Based Superalloy

Micromechanisms of Deformation and Fracture in a Ti3Al-Nb Alloy

Anisotropic damage evolution and modeling for a nickel-based superalloy built by additive manufacturing

Modeling of the Thermomechanical Behavior, Damage, and Fracture of High Alloy TRIP-Steel

Crystal Plasticity Based Investigation of the Effects of Additive Manufactured Voids on the Strain Localization Behaviour of Ti-6al-4v