Abstract:Hydrogen sulfide (H2S) is an extremely hazardous gas and is harmful to human health and the environment. Here, we developed a flexible H2S gas-sensing device operated at room temperature (25 °C) based on CuO nanoparticles coated with free-standing TiO2-nanochannel membranes that were prepared by simple electrochemical anodization. Benefiting from the modulated conductivity of the CuO/TiO2 p–n heterojunction and a unique nanochannel architecture, the traditional thermal energy was innovatively replaced with UV irradiation (λ = 365 nm) to provide the required energy for triggering the sensing reactions of H2S. Importantly, upon exposure to H2S, the p–n heterojunction is destroyed and the newly formed ohmic contact forms an antiblocking layer at the interface of CuS and TiO2, thus making the sensing device active at room temperature. The resulting CuO/TiO2 membrane exhibited a notable detection sensitivity for H2S featuring a minimum detection limit of 3.0 ppm, a response value of 46.81% against 100 ppm H2S gas, and a rapid response and recovery time. This sensing membrane also demonstrated excellent durability, long-term stability, and wide-range response to a concentration of up to 400 ppm in the presence of 40% humidity as well as outstanding flexibility and negligible change in electrical measurements under various mechanical stability tests. This study not only provides a new strategy to design a gas sensor but also paves a universal platform for sensitive gas sensing.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssensors.1c01256.Photographs; SEM images; XPS spectra; UV–vis absorption spectra; EDS spectra; XRD spectra; tables and resistance of TiO2 and CuO/TiO2 under different conditions (PDF)This article has not yet been cited by other publications.

Ultrathin Leaf-Shaped CuO Nanosheets Based Sensor Device for Enhanced Hydrogen Sulfide Gas Sensing Application

Nanosheet assembled NiO-doped-ZnO flower-like sensors for highly sensitive hydrogen sulfide gas detection

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Hydrothermally synthesized MXene Ti3C2/Zn2SnO4 based nanocomposite for H2S sensing at room temperature

ZnO@CuO hollow nanospheres based composites used for sensitive detection of hydrogen sulfide with long-term stability

Exploiting Free-Standing p-CuO/n-TiO 2 Nanochannels as a Flexible Gas Sensor with High Sensitivity for H 2 S at Room Temperature

Studies on Sensing Properties and Mechanism of CuO Nanoparticles to H2S Gas

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

Facile wet chemical synthesis of Al doped CuO nanoleaves for carbon monoxide gas sensor applications

Cellulose-Copper Oxide hybrid nanocomposites membranes for H2S gas detection at low temperatures

Cu2O induced Au nanochains for highly sensitive dual-mode detection of hydrogen sulfide

Design of P–p Heterojunctions Based on CuO Decorated WS2 Nanosheets for Sensitive NH3 Gas Sensing at Room Temperature

An olive-shaped SnO2 nanocrystal-based low concentration H2S gas sensor with high sensitivity and selectivity

Ultrathin SnO2 Nanosheets with Dominant High-Energy {001} Facets for Low Temperature Formaldehyde Gas Sensor

An Au/SnO-SnO2 nanosheet based composite used for rapid detection of hydrogen sulphide

Ultrathin Copper Monosulfide Films for an Optically Semitransparent, Highly Selective Ammonia Chemosensor

ZnO Nanoparticle-Based MEMS Sensors for H2S Detection

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

Pt Nanoparticle-Modified SnO<sub>2</sub>-ZnO Core-Shell Nanosheets on Microelectromechanical Systems for Enhanced H<sub>2</sub>S Detection

SnS2 Nanosheets as a Template for 2D SnO2 Sensitive Material: Nanostructure and Surface Composition Effects

ZnO Nanoparticle-Based MEMS Sensors for H 2 S Detection