Abstract:Conductometric detection of hydrogen sulfide (H2S) gas is highly desired in the fields of environmental protection and noninvasive human health assessment due to its unique merits of real-time monitoring, low cost, and high miniaturization. In this regard, semiconducting metal oxides, such as tin oxide (SnO2), have been extensively employed for H2S detection but suffer from constrained sensitivity, elevated operation temperature, and poor selectivity. To overcome these drawbacks, mixed-dimensional heterostructures of two-dimensional (2D) black phosphorus (BP) nanosheet-templated zero-dimensional (0D) SnO2 quantum dots (QDs) (BP/SnO2) were prepared in this work for trace H2S detection. The constituent ratio-optimized BP/SnO2 sensors showed a high response of 233.8 and swift response/recovery speeds of 16.4/9.5 s toward 5 ppm H2S and ultralow energy consumption at a relatively low operation temperature (10 mW@130 °C), rivaling or surpassing that of most of the sensors in recent academic reports and commercial products. Moreover, excellent repeatability, long-term stability, and selectivity were demonstrated. When exposed to 5 ppm H2S under 80% relative humidity, the sensor displayed a 75% response retention with respect to the dry case, revealing a favorable humidity tolerance. Furthermore, the BP/SnO2 sensors outperformed their reduced graphene oxide (rGO)- and molybdenum disulfide (MoS2)-templated counterparts in terms of response intensity and response/recovery speeds. Benefiting from the abundant p–n heterojunctions and sufficient material utility within the mixed-dimensional heterostructures, the as-prepared BP/SnO2 sensors showcased brilliant application prospects for energy-saving and portable H2S detection systems.

An Au/SnO-SnO2 nanosheet based composite used for rapid detection of hydrogen sulphide

ZnO@CuO hollow nanospheres based composites used for sensitive detection of hydrogen sulfide with long-term stability

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

Ultra-large Sn3O4 nanosheets with Sn2+ defect for highly efficient hydrogen sensing

3D Porous MXene Nanosheet/SnO 2 Nanoparticle Composites for H 2 S Gas Sensing

Nanosheet assembled NiO-doped-ZnO flower-like sensors for highly sensitive hydrogen sulfide gas detection

Rapid Detection of Ultralow H 2 S Concentration with on-chip Fabrication of SnO 2 -based Gas Sensors by Direct Electrodeposition from Non-Aqueous Solvents

Pt Nanoparticle-Modified SnO 2 –ZnO Core–Shell Nanosheets on Microelectromechanical Systems for Enhanced H 2 S Detection

Hydrothermally synthesized MXene Ti3C2/Zn2SnO4 based nanocomposite for H2S sensing at room temperature

ZnO Nanoparticle-Based MEMS Sensors for H2S Detection

ZnO Nanoparticle-Based MEMS Sensors for H 2 S Detection

Pt Nanoparticle-Modified SnO<sub>2</sub>-ZnO Core-Shell Nanosheets on Microelectromechanical Systems for Enhanced H<sub>2</sub>S Detection

Cu2O induced Au nanochains for highly sensitive dual-mode detection of hydrogen sulfide

Bimetallic AuPt Alloy Nanoparticles Decorated on ZnO Nanowires Towards Efficient and Selective H2S Gas Sensing

Electroless Plated SnO2–Pd–Au Composite Thin Film for Room Temperature H2 Detection

Photoelectric H2S Sensing Based on Electrospun Hollow CuO-SnO2 Nanotubes at Room Temperature

Bio-inspired spindle-shaped wrinkled Au/ZnO nanoparticles for H2S-sensing enhancement

Synthesis and room-temperature H2S sensing of Pt nanoparticle-functionalized SnO2 mesoporous nanoflowers

A highly sensitive MoS2 nanosheet gas sensor prepared by mechanically exfoliating for room temperature H2S detection

Black Phosphorus Nanosheet/Tin Oxide Quantum Dot Heterostructures for Highly Sensitive and Selective Trace Hydrogen Sulfide Sensing