Abstract:International Journal of Aeroacoustics, Ahead of Print. The accurate prediction of the trailing-edge noise and the determination of its sources are essential to reduce fans and propellers noise. This noise component is due to the scattering of the turbulent boundary layer into acoustic waves by the trailing edge. In this paper, the noise emanating from a CD (Controlled-Diffusion) airfoil is simulated and computed via the hybrid methods of aeroacoustics. In these methods, the aerodynamic and acoustic fields are computed separately. The flow data are obtained using the in-house LES solver SFELES. ACTRAN acoustic solver has been used to solve the acoustics and to provide the near and far fields propagation via Lighthill's analogy. Curle's analogy is applied as well in its integral compact formulation which takes the presence of walls into account. Curle's formulation is applied proposing an approach where the volume and surface integrals have been implemented in SFELES to be calculated simultaneously with the flow in order to avoid the storage of noise sources which requires a huge space. In Lighthill's analogy, sources and near field maps show that the turbulent boundary layer and wake are the more efficient sources and the center of radiation is the trailing edge. The comparison of the numerical results with the experimental measurements, performed by Moreau and Roger and Moreau et al. , shows an overall excellent agreement confirming the capability of SFELES (LES sources) combined with ACTRAN (Lighthill's analogy) to predict correctly the noise generated by turbulent flows around airfoils. The acoustic spectrum presents an overprediction up to 5 dB at the frequencies 300 Hz and 550 Hz and an underprediction about 5 dB at the frequencies 1100 Hz and 1750 Hz. The sound pressure level (SPL) obtained using the proposed approach of Curle's analogy matches very well the experimental results. Thus, Curle's analogy can be used to obtain a fast, approximated and acceptable results about the noise radiation of airfoils avoiding the storage of noise sources which requires a huge space and time.

Noise reduction prediction of Ariane 5 fairing with acoustic protection made of porous‐elastic material

Analysis and Optimization for Medium and High Frequency Noise Attenuation of Rocket Fairings with Porous Material

Noise and Vibration Reduction Analysis of Large Launch Vehicle Fairing

Aeroelastic- acoustics numerical simulation research

Vibro-acoustic analysis of the sound transmission through aerospace composite structures

A Plane Strain Elasticity Model for the Acoustical Properties of Rib-Stiffened Composite Plates

MODELING AND DESIGN METHODOLOGIES FOR SOUND ABSORBING POROUS MATERIALS WHEN USED AS LAYERED VIBRATION DAMPERS

Prediction of the acoustic effect of an interior trim porous material inside a rigid-walled car air cavity model

Improving acoustic wave propagation models in highly attenuating porous materials

Nonlinear Thermo-Acoustic Response and Fatigue Prediction of Three-Dimensional Braided Composite Panels in Supersonic Flow

Acoustic response of a curved active PVDF-paper/fabric speaker for active noise control of automotive interior noise

Prediction of the aerodynamic noise of an airfoil via the hybrid methods of aeroacoustics

Structural vibration reduction achieved by lightweight porous layers through the near-field damping effect: A technical summary

The Fast Prediction of Sound Radiation from Typical Submarine Cabin Based on Acoustic Transfer Vector

Semi-analytical formulation to predict the vibroacoustic response of a fluid-loaded plate with ABH stiffeners

Numerical vibroacoustic analysis of plates with constrained-layer damping patches

Acoustic optimization design of porous materials on sandwich panel under flow-induced vibration

Deflector shape impact on aero-acoustic noise generation and propagation

Acoustic Fatigue Research for Honeycomb Sandwich Structure with Impact Damage Based on Vibro-Acoustic Coupling Analysis

Investigation of vibro-acoustic characteristics of FRP plates with porous foam core

Prediction of the sound field above a patchwork of absorbing materials