Abstract:The research described in the article addresses the problem of measurement, prediction and practical use of the acoustic properties of materials determined in an impedance tube. The aim of the research was to develop a simple calculation model for the insertion loss of small machinery enclosures, based on the normal incidence sound transmission loss and the normal incidence sound absorption coefficient of porous and fibrous materials. Both experimental and model tests were carried out on materials such as mineral wool, melamine foam and rebonded polyurethane foam. Assessing the absorption properties of the tested porous and fibrous materials was performed using selected theoretical models, relating the calculations of the normal incidence sound absorption coefficient to measurements of this parameter conducted using an impedance tube. The application of the modified Allard and Champoux model brought the best results with the smallest discrepancies of the obtained results in relation to the experimental tests. Assessing the sound-insulating properties of the tested mineral wool was carried out using the proposed calculation model for the normal incidence sound transmission loss, relating the obtained results to measurements conducted using an impedance tube. The assessment of the sound-insulating properties of porous and fibrous materials was performed using the proposed calculation model for insertion loss, which was validated using two prototype test stands for determining the insertion loss of cubic enclosures, in this case with walls made of porous and fibrous materials. Satisfactory results were obtained for engineering applications in the calculation results using the proposed models with respect to measurements. The results may have practical applications in assessing the effectiveness of acoustic enclosures, in which the basic construction material is an appropriate porous or fibrous plate, selected to have both sound-absorbing and sound-insulating properties.

Prediction of the sound field above a patchwork of absorbing materials

A hybrid sub-structuring method for prediction of air inlet sound transmission

Analysis of the sound field above finite absorbers in the wave-number domain

A validated finite element model for room acoustic treatments with edge absorbers

Sound field of a baffled piston source covered by a porous medium layer

Characterization of acoustic materials at arbitrary incidence angle using sound field synthesis

An Efficient Method for Acoustic Response Prediction in the Mid-Frequency Range

Predicting the acoustic response of a cylindrical shell immersed in an underwater waveguide using a substructuring technique

Modelling the Acoustic Properties of Baffles Made of Porous and Fibrous Materials

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

A Coherent Image Source Method for Sound Prediction in Long Spaces with a Sound Absorbent Ceiling

Sound absorption estimation of finite porous samples with deep residual learninga)

Improving acoustic wave propagation models in highly attenuating porous materials

Estimating the acoustical properties of locally reactive finite materials using the boundary element method

The Fast Prediction of Sound Radiation from Typical Submarine Cabin Based on Acoustic Transfer Vector

In situ sound absorption estimation with the discrete complex image source method

Direct discrete complex image method for sound field evaluation above a non-locally reacting layer

Aeroacoustic source prediction using material surfaces bounding the flow

A coherent model of sound propagation in long enclosures with different acoustics boundaries

Free-field method for inverse characterization of finite porous acoustic materials using feed forward neural networks

Prediction of the vibro-acoustic response of a structure-liner-fluid system based on a patch transfer function approach and direct experimental subsystem characterisation