Abstract:When the spacecraft flies much faster than the sound speed (~1200 km/h), the airflow disturbances deflected forward from the spacecraft cannot get away from the spacecraft and form a shock wave in front of it. Shock waves have been a detriment for the development of supersonic aircrafts, which have to overcome high wave drag and surface heating from additional friction. Shock wave also produces sonic booms. The noise issue raises environmental concerns, which have precluded routine supersonic flight over land. Therefore, mitigation of shock wave is essential to advance the development of supersonic aircrafts. A plasma mitigation technique is studied. A theory is presented to show that shock wave structure can be modified via flow deflection. Symmetrical deflection evades the need of exchanging the transverse momentum between the flow and the deflector. The analysis shows that the plasma generated in front of the model can effectively deflect the incoming flow. A non-thermal air plasma, generated by on-board 60 Hz periodic electric arc discharge in front of a wind tunnel model, was applied as a plasma deflector for shock wave mitigation technique. The experiment was conducted in a Mach 2.5 wind tunnel. The results show that the air plasma was generated symmetrically in front of the wind tunnel model. With increasing discharge intensity, the plasma deflector transforms the shock from a welldefined attached shock into a highly curved shock structure with increasing standoff distance from the model; this curved shock has increased shock angle and also appears in increasingly diffused form. In the decay of the discharge intensity, the shock front is first transformed back to a well-defined curve shock, which moves downstream to become a perturbed oblique shock; the baseline shock front then reappears as the discharge is reduced to low level again. The experimental observations confirm the theory. The steady of the incoming flow during the discharge cycle is manifested by the repeat of the baseline shock front.

Deflector shape impact on aero-acoustic noise generation and propagation

URANS Analysis of a Launch Vehicle Aero-Acoustic Environment

Effects of Protuberances on Surface Loads on the Vega-C Launch Vehicle

Research on Convective Cooling and Thermal Protection Characteristics of Integrated Dual-Sided Deflector System

Shock Wave Mitigation by Air Plasma Deflector

Aerothermodynamic Analysis of Faceted Aeroshell at Hypersonic Speed

Deflector Optimization in reducing cavitation intensity in the pilot stage of deflector jet servo-valve

Numerical studies on four-engine rocket exhaust plume impinging on flame deflectors with afterburning

Noise and Vibration Reduction Analysis of Large Launch Vehicle Fairing

Aerostructural Analysis of a Deployable Aeroshell in Transonic Flow

Aero Heating Optimization of a Hypersonic Thermochemical Non-Equilibrium Flow around Blunt Body by Application of Opposing Jet and Blunt Spike

Numerical study on jet noise suppression with water injection during one-nozzle launch vehicle lift-off

Integrated Deflector Shield Technology for Spacecraft

A proposed wavy shield for suppression of supersonic jet noise utilizing reflections

Aerodynamic and aeroacoustic characteristics of rocket sled under strong ground effect

Noise reduction prediction of Ariane 5 fairing with acoustic protection made of porous‐elastic material

Research on the Cooling Effect of Water Injection of the Deflector on Flame of the Vertical Launch Missile

XFEM-Based Study of Fatigue Crack Propagation in Rocket Deflector Troughs under Coupled High-Temperature and Impact Conditions

Characteristic Analysis of Acoustic Emission Signals Caused by Debris Cloud Impact

Mechanisms of failure of aluminium-based Whipple shields under hypervelocity impact: insights from continuum simulations

Hybrid computational fluid dynamics and computational aero-acoustic modeling for liftoff acoustic predictions