Abstract:High-power multicycle THz radiation is highly sought after with applications in medicine, imaging, spectroscopy, characterization and manipulation of condensed matter, and could support the development of next-generation compact laser-based accelerators with applications in electron microscopy, ultrafast X-ray sources and sub-femtosecond longitudinal diagnostics. Multicycle THz-radiation can be generated by shooting an appropriate laser through a periodically poled nonlinear crystal, e.g. lithium niobate (PPLN). Unfortunately, the manufacturing processes of PPLNs require substantially strong electric fields $\mathcal{O}(10~kV/mm)$ across the crystal width to locally reverse the polarization domains; this limits the crystal apertures to below 1 cm. Damage threshold limitations of lithium niobate thereby limits the laser power which can be shone onto the crystal, which inherently limits the production of high-power THz pulses. Here we show that in the THz regime, a PPLN crystal can be mechanically constructed in-air by stacking lithium niobate wafers together with 180$^{\circ}$ rotations to each other. The relatively long (mm) wavelengths of the generated THz radiation compared to the small gaps ($\sim$10 $\mu$m) between wafers supports a near-ideal THz transmission between wafers. We demonstrate the concept using a Joule-class laser system with $\sim$50 mm diameter wafers and measure up to 1.3 mJ of THz radiation corresponding to a peak power of $\sim$35 MW, a 50 times increase in THz power compared to previous demonstrations. Our results indicate that high-power THz radiation can be produced with existing and future high-power lasers in a scalable way, setting a course toward multi-gigawatt THz pulses. Moreover the simplicity of the scheme provides a simple way to synthesize waveforms for a variety of applications.

Creating terahertz pulses from titanium-doped lithium niobate-based strip waveguides with 1.55 μm light

Enhanced Cherenkov phase matching terahertz wave generation via a magnesium oxide doped lithium niobate ridged waveguide crystal

Investigation of ultra-broadband terahertz generation from sub-wavelength lithium niobate waveguides excited by few-cycle femtosecond laser pulses

Efficient Generation of a High-Field Terahertz Pulse Train in Bulk Lithium Niobate Crystals by Optical Rectification.

Generation of 13.9‐mJ Terahertz Radiation from Lithium Niobate Materials

Near-optimal intense and powerful terahertz source by optical rectification in lithium niobate crystal

Far infrared to terahertz widely tunable narrow linewidth light source via surface-emitting periodically poled thin film lithium niobate waveguides

Generation of 0.7 mJ multicycle 15 THz radiation by phase-matched optical rectification in lithium niobate

Fabrication of titanium in-diffusion waveguide in the PIN-PMN-PT single crystal

Multi-watt, broadband second-harmonic-generation in MgO:PPSLT waveguides fabricated with femtosecond laser micromachining

Lithium–Niobate Channel Waveguide for the Realization of Long-Period Gratings

Terahertz waveform synthesis in integrated thin-film lithium niobate platform

High-repetition-rate injection-seeded terahertz-wave parametric generation pumped by a 1.5 μ m sub-nanosecond laser

Half-percent terahertz generation efficiency from cryogenically cooled lithium niobate pumped by Ti:sapphire laser pulses

Efficient Single-Photon Frequency Upconversion at Telecommunication Wavelengths with Ti-Indiffused Periodically-Poled Linbo3 Waveguides

1.4-mJ High Energy Terahertz Radiation from Lithium Niobates

Wavelength conversion in a Ti:PPSMgLN channel waveguide

35 megawatt multicycle THz pulses from a homemade periodically poled macrocrystal

Terahertz generation by optical rectification in lithium niobate crystal using a shadow mask.

Low loss titanium dioxide strip loaded waveguide on thin-film lithium niobate at 1550nm

Ionizing terahertz waves with 260 MV/cm from scalable optical rectification