Abstract:The aim of the work is to study the effect the variation of the phase-shifting transformer (PST) reactance has on the accuracy of calculating its control angle and the electrical network operating parameters obtained as a result of this control. The operating parameters, in particular, active power flows in the electrical circuit branches, are controlled by changing the PST angle; however, in view of the PST design features, this control entails a change of its reactance. Depending on the design features of different PST models and the control angle value, the PST reactance may be constant or vary in a significant range. In connection with a growing use of PSTs in industrially developed countries and with the fact that the first samples of this equipment have emerged in the CIS countries, including Russia, an increased attention is paid to this topic in a number of domestic and foreign publications. In particular, matters concerned with the stability of electric operation modes are considered in view of the fact that the PST reactance depends on its control angle, and the effect this dependence has on the operating parameters is estimated. The necessity of taking into account the varying PST reactance in calculating its control angle for controlling active power flows is considered for different cases. Forced redistribution of active power flows in the closed loops of an electrical network by means of a PST can be used to reduce active power losses and to maintain the required loading of the power lines for various reasons, for example, for commercial purposes or in the case of transit power flows between different countries. In view of the complexity of calculations, constant values of the PST reactance are usually assumed, but this approach is valid not for all types of PST designs. In the majority of PSTs, their reactance varies with increasing the control angle. Therefore, calculations carried out without taking this feature into account may yield a fortiori incorrect correspondence between the control angle and the transformer reactance value. In turn, an error will be introduced in the accuracy of the PST control angle calculations, as well as in the calculations of the operating parameters that should be obtained from the control action.

Phase-Shifting Transformer Efficiency Analysis Based on Low-Voltage Laboratory Units

Application of Phase-Shifting Transformer with Longitudinal and Transverse Voltage Regulation

The use of finite elements modeling to analyze phase shifting transformer in steady-state service conditions

A novel PCB winding transformer with controllable leakage integration for a 6.6kW 500kHz high efficiency high density bi-directional on-board charger

Performance evaluation of phase-shifting transformer for integration of renewable energy sources

Efficiency and Cost Based Multi-optimization and Thermal/Electromagnetic Analyses of 3-Phase Dry-Type Transformer

Power Flow Regulation Effect and Parameter Design Method of Phase-Shifting Transformer

Modeling and Analysis of New Power Devices Based on Linear Phase-Shifting Transformer

Phase Shading for Light Load Efficiency Improve in Three-Phase Resonant Converter with Integrated PCB Winding Magnetics

Use of a phase-shifting transformer for increasing the power transmission capacity, taking into account the mode of the adjacent network

Efficiency Enhancement of DC Solid-State Transformers by Dynamically Adjusting Active Cells

Equivalent Circuit Analysis of Linear Phase-Shifting Transformer with End Effect

A Three-Stage Power Electronic Transformer with Time-Sharing H-Bridges

Idling and Short-circuit Analysis of a Three-phase Power Transformer Represented by a Scheme with Distributed Parameters and П line Scheme in the Electrical Network

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

Electromagnetic Vibration and Noise Analysis of Linear Phase-Shifting Transformer

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Power Flow Optimization and Economic Analysis Based on High Voltage Phase Shifting Transformer

Electrical, thermal and electro-magnetic analyses of a 100 kHz interleaved power electronic transformer

Phase shifting transformer to reduce power congestions and to redistribute power in interconnected systems

Calculating the Electric Network Operating Parameters Taking into Account the Phase-Shifting Transformer's Variable Reactance