Abstract:Cementitious waste forms (CWFs) are an important component of the strategy to stabilize nuclear waste resulting from plutonium production by the U. S. Department of Energy. Technetium (99Tc) is an abundant fission product of particular concern in CWFs because of the high solubility and mobility of Tc(VII), pertechnetate (TcO4-), the stable form of technetium in aerobic environments. CWFs can more effectively stabilize 99Tc if they contain additives that chemically reduce mobile TcO4- to immobile Tc(IV) species. The 99Tc leach rate of reducing CWFs that contain Tc(IV) is much lower than that for CWFs that contain TcO4-. Previous X-ray absorption fine structure studies showed that Tc(IV) species were oxidized to TcO4- in reducing grout samples prepared on a laboratory scale. Whether the oxidizer was atmospheric O2 or NO3- in the waste simulant was not determined. In actual CWFs, rapid oxidation of Tc(IV) by NO3- would be of concern, whereas oxidation by atmospheric O2 would be of less concern due to the slow diffusion and reaction of O2 with the reducing CWF. To address this uncertainty, two series of reducing grouts were prepared using TcO4- containing waste simulants with and without NO3-. In the first series of samples, referred to as "permeable samples", the TcO4- was completely reduced using Na2S, and the samples were sealed in cuvettes made of polystyrene, which has a relatively large O2 diffusion coefficient. In these samples, all of the technetium was initially present as a Tc(IV) sulfide compound, TcSx, which was characterized by extended X-ray absorption fine structure (EXAFS) spectroscopy. The EXAFS data is consistent with a structure consisting of triangular clusters of Tc(IV) centers linked together through a combination of disulfide and sulfide bridges as in MoS3. From the EXAFS model, the stoichiometry of TcSx is TC3S10, which is presumably the compound generally referred to as "Tc2S7". The TcSX initially present in the permeable samples was steadily oxidized over 4 years. In the second series of samples, called "impermeable samples", the TcO4- was not initially completely reduced, and the groutsamples were sealed in cuvettes made of poly-(methyl methacrylate), which has a small O2 diffusion coefficient. In the impermeable samples, the remaining TcO4- continued to be reduced, presumably by blast furnace slag in the grout, as the samples aged. When the impermeable samples were opened and exposed to atmosphere, the lower-valent technetium species were rapidly oxidized to TcO4-.

Technetium reduction and reoxidation behaviour in Dounreay soils

Technetium reduction in sediments of a shallow aquifer exhibiting dissimilatory iron reduction potential

Treatment of radioactive wastes: an X-ray absorption spectroscopy study of the reaction of technetium with green rust

Influence of alkaline co-contaminants on technetium mobility in vadose zone sediments

Biogeochemical Cycling of 99Tc in Alkaline Sediments

Reductive removal of pertechnetate and chromate by zero valent iron under variable ionic strength conditions

Biotransformation of pertechnetate by Clostridia

Evolution of technetium speciation in reducing grout

Sequestration of Pertechnetate Using Carboxymethyl Cellulose Stabilized FeS Nanoparticles: Effectiveness and Mechanisms

Photoreduction of 99Tc pertechnetate by nanometer-sized metal oxides: new strategies for formation and sequestration of low-valent technetium

Reductive immobilization of pertechnetate in soil and groundwater using synthetic pyrite nanoparticles

Identification and Quantification of Technetium Species in Hanford Waste Tank AN-102

Successful Decontamination of 99 TcO 4 − in Groundwater at Legacy Nuclear Sites by a Cationic Metal‐Organic Framework with Hydrophobic Pockets

Removal of TcO4(-) ions from solution: materials and future outlook

Evaluation of materials for iodine and technetium immobilization through sorption and redox-driven processes

Environmental geochemistry of technetium

Porous iron material for TcO4- and ReO4- sequestration from groundwater under ambient oxic conditions

Comparative analysis of ZVI materials for reductive separation of 99Tc(VII) from aqueous waste streams

Using porous iron composite (PIC) material to immobilize rhenium as an analogue for technetium

Facile incorporation of technetium into magnetite, magnesioferrite, and hematite by formation of ferrous nitrate in situ: precursors to iron oxide nuclear waste forms

Effective Removal of Anionic Re(VII) by Surface-Modified Ti2CTx MXene Nanocomposites: Implications for Tc(VII) Sequestration