Abstract:Investment casting process is an important way to get complex parts of titanium alloy. However there are few research on the interfacial heat transfer coefficient(h) between casting and shell thus the temperature simulation of investment casting process of titanium alloy is often inaccurate. In order to get a relatively accurate h,a one-dimensional mathematical model for the reverse calculation of h between casting and shell in investment casting process of Ti6Al4 V alloy was built and the analytic relationship between temperature and time/heat flux was established. Considering the calculated h is significantly affected by the error of parameters such as the specific heat capacity and thermal diffusivity of shell and position of thermocouples, research on the error of these parameters is essential. The relationship between the error of these parameters and the temperatures in the casting and shell was studied and it was found that the effect of different kind of error on the temperature field was obviously different.An experiment based on the one-dimensional mathematical model was done and temperatures of different positions were measured. Based on the effect of different kind of error and the difference between the calculate temperature field and the measured temperatures, the proportion of effect of each kind of error was assessed. These errors were revised on the basis of the assessment, thus a relatively accurate h between the casting and shell was obtained. The relationships between h and thickness of the solidified layer on the casting/temperature at the surface of casting can be divided into 4 stages:(1) Metal was liquid and h kept about 440 W/(m2·K);(2) Solid layer appeared on the surface, and h declined nearly 60%;(3) Solid layer grew up before metal became completely solid and h declined nearly 20% of its maximum;(4) After metal solidified, h declined slowly as temperature on the surface of casting dropped. These relationships were applied in a three-dimensional model for numerical simulation of the temperature field. Temperatures of different positions in casting and shell were calculated and calculated temperatures agreed with measured ones well. Thus the accuracy of h was identified and it can help solve problems in the production in investment casting process of Ti6Al4 V alloy.

Investment Casting Simulation and Analysis of Shell AlSi11 Alloy Part

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Numerical Simulation and Optimization of Investment Casting for Complex Thin-walled Castings

Simulation of the solidification organization of X15CrNiSi20-12 alloy castings during investment casting based on the CAFE model

Modeling of Investment Casting of Ti48Al48Cr2Nb2 (at%) Alloy Air Rudder Skeleton

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Production of ZL205A Alloy Shell Castings by Low Pressure Casting

Numerical Simulation for the Investment Casting Process of a Large-Size Titanium Alloy Thin-Wall Casing

Numerical modeling and simulation of water cooling-controlled solidification for aluminum alloy investment casting

Investment Casting Processing Based on Stereolithography Pattern

Numerical Simulation and Process Optimization of Vacuum Investment Casting for Be–Al Alloys

A Research on Investment Casting Technology of Ti Alloys

RESEARCH ON THE INTERFACIAL HEAT TRANSFER COEFFECIENT BETWEEN CASTING AND CERAMIC SHELL IN INVESTMENT CASTING PROCESS OF Ti6Al4V ALLOY

Optimization of Investment Casting Parameters for Reduction of Shrinkage Porosity in Nickel-Based Superalloy Castings by Taguchi Method

Semi-solid plasticity and deformation control of superalloy investment casting

Modeling Of Tial Alloy Grating By Investment Casting

Optimizing the Gating System for Rapid Investment Casting of Shape Memory Alloys: Computational Numerical Analysis for Defect Minimization in a Simple-Cubic Cell Structure

Numerical Simulation of Solidification Process for Impeller Investment Casting Based on ProCAST

Preparing and analyzing of investment cast mould shell for titanium alloys

Simulation Study on the Investment Casting Process of a Low-Cost Titanium Alloy Gearbox based on ProCAST