Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Implementing Actuated Signal-Controlled Intersection Capacity Analysis with Pedestrians

Modeling Capacity at Signalized Intersections with a Left-Turn Storage Bay Considering Signal Timing Plan

Capacity Model of Exclusive Right-Turn Lane at Signalized Intersection considering Pedestrian-Vehicle Interaction

Evaluating Stability and Performance in Mixed Traffic: A Theoretical and Co-Simulation Approach

Dynamic Characteristics of Traffic Flow with Consideration of the Pedestrians’

Dynamic Characteristics of Traffic Flow with Consideration of Pedestrians’ Road-Crossing Behavior

Influence of signal on the capacity of signalized intersection

Left-Turn Lane Capacity Estimation based on the Vehicle Yielding Maneuver Model to Pedestrians at Signalized Intersections

Evaluation of signaled intersection status under capacity of sections

Bicycle and Pedestrians' Arrival and Departure Characteristics at Signalized Intersection

Study on Pedestrian Signal Cycle Optimization

Capacity of unsignalized intersection with mixed distribution headway

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Conditions for Setting Exclusive Pedestrian Phases at Two-Phase Signalized Intersections considering Pedestrian-Vehicle Interaction

Capacities and Delays of Non-Motorized Traffic Streams at Signal-Less Intersections

A pedestrian hopping model and traffic light scheduling for pedestrian-vehicle mixed-flow networks

The influence of non-motorized streams on capacities of vehicular streams at unsignalized intersections

A Group-Based Signal Timing Optimization Model Considering Safety for Signalized Intersections with Mixed Traffic Flows

A Simulation Model of Signal Controlled Pedestrian Crossings

A cellular automata approach for modelling pedestrian-vehicle mixed traffic flow in urban city

A Micro-Simulation Model of Pedestrian-Vehicle Interaction Behavior at Unsignalized Mid-Block Locations