Abstract:To further improve the durability of pavement structure and promote the research and application of rubber cement stabilized base, the research results of rubber modified cement-based materials and their cement stabilized base were systematically combed. The action principles of different rubber surface treatment technologies were revealed, and based on the principle of similar adhesion characteristics between rubber and cement-based materials, the treatment technology type and the optimal concentration of treatment agent suitable for rubber cement stabilized base were determined. The key sieve pass rate of mineral material gradation was recommended, and the best preparation process for rubber cement stabilized base was determined. The mechanical and fatigue properties of cement stabilized base with different rubber particle size and content were evaluated, the bonding and anti-cracking mechanism of the rubber cement stabilized base was explored. Results indicate that considering the treatment effect and cost, NaOH solution with concentration of 5% is recommended as rubber surface treatment agent. The discontinuous gradation with the aggregate nominal maximum particle size of 26.5 mm is the common gradation of rubber cement stabilized base. It is recommended that the passing rate of 4.75 mm, 2.36 mm and 0.075 mm sieve holes be controlled at 32–43%, 22–28% and 1.5–3.6% to ensure compactness. Compared with heavy compaction method, vibration compaction method not only has less aggregate damage, but also beneficial to reduce the dry shrinkage deformation of the rubber cement stabilized base. Compared with rubber powder (<0.6 mm), the 90 d compressive resilience modulus of the rubber particle(≥0.6 mm)cement stabilized base can be reduced by 25.16%, which has a more significant improvement in toughness. With the increase of rubber content, the mechanical properties of rubber cement stabilized base decreases gradually, the fatigue resistance and deformation ability are significantly enhanced, and it has good durability. This research results can provide scientific basis and theoretical support for rubber cement stabilization base engineering application and quality control.

Review of the design, characterisation and production of foamed bitumen stabilised base courses for pavement construction

Bitumen stabilised materials for sustainable pavements: a review

Design and sustainability analyses of road base layers stabilized with traditional and nontraditional additives

Stabilisation of marginal lateritic soil using high calcium fly ash-based geopolymer

Hydraulic characteristics of stabilised expansive subgrade soils in road pavements

A state-of-the-art review of rubber modified cement-based materials: Cement stabilized base

Evaluation of two nano-silane-modified emulsion stabilised pavements using accelerated pavement testing

Performance Evaluation of Stabilized Base Course using Asphalt Emulsion and Asphaltenes Derived from Alberta Oil Sands

Green roads ahead: a critical examination of bio-bitumen for sustainable infrastructure

Comparison of Pavement Slab Stabilization Using Cementitious Grout and Injected Polyurethane Foam

Biomaterials and Their Potentialities as Additives in Bitumen Technology: A Review

A systematic review of geo-polymer stabilised reclaimed asphalt pavement (RAP) as a base layer of pavement

Styrene-Butadiene-Styrene polymer modified bitumen: A review on compatibility and physico-chemical properties

Using Foamed Concrete Layer to Optimize the Design of Pavement and Subgrade Structures: from the Perspectives Economy and Durability

Practical Application of Nanotechnology Solutions in Pavement Engineering: Identifying, Resolving and Preventing the Cause and Mechanism of Observed Distress Encountered in Practice during Construction Using Marginal Materials Stabilised with New-Age (Nano) Modified Emulsions (NME)

A Preliminary Characterisation of Innovative Semi-Flexible Composite Pavement Comprising Geopolymer Grout and Reclaimed Asphalt Planings

Investigating non-petroleum-based biodegradable polymers as eco-friendly and sustainable materials in asphalt modification: A review on natural rubbers and natural oils

Mechanistic Analysis of ST and SBS-modified Flexible Pavements

A review of grouting materials for pouring semi-flexible pavement: Materials, design and performance

Utilizing expansive soil treated with phosphogypsum and lime in pavement construction

Sustainable utilization of bauxite residue (Red Mud) as a road material in pavements: A critical review