Abstract:Recycled demolition waste (RDW) and ground granulated blast furnace slag-fly ash-based geopolymer (GFG) are promising materials for treating high-plasticity clay (CH) in highway subgrades. However, the underlying synergistic stabilization mechanisms remain unclear. To elucidate the fundamental mechanisms governing post-treatment soil stabilization, a multi-scale laboratory investigation was undertaken. This investigation encompassed the evaluation of mechanical properties (compaction, California bearing ratio (CBR), and unconfined compressive strength (UCS)) to quantify the enhanced performance of the treated soil. Additionally, microstructural and mineralogical characterization was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and atomic force microscopy (AFM) to elucidate the microscopic mechanisms responsible for this improvement. The results indicated that the addition of RDW led to a reduction in the optimum moisture content (OMC) while increasing the maximum dry density (MDD) of CH. Moreover, upon incorporating RDW-GFG, the mechanical properties of the cured soil exhibited significant improvement. Specifically, the addition of 25% RDW to CH resulted in a 184% increase in CBR and effective improvement in water stability (immersion swelling percentage is reduced). Furthermore, when 25% RDW and 15% GFG were added to CH, the UCS has increased significantly by 8 times. The addition of RDW effectively enhanced the particle size distribution, compacted the soil, thus increased the shear strength. The results from XRD and SEM analyses revealed that the inclusion of GFG could generate geopolymer cementitious bonding network in the soil matrix. These materials facilitated bonding between CH particles and RDW, filling the pores and densifying the overall structure, thus increasing its strength. The synergy of RDW-GFG substantially improved the highly plastic soil through physicochemical actions, markedly elevating both its strength and water stability. Consequently, the outcomes of this experimental study offer valuable insights for road engineering applications.

Stabilization of Coarse Aggregates with Traditional and Nontraditional Additives

Aggregation and Dehydration of Excavated Soft Clay and Use for Subgrade Engineering–part 1: A Laboratory Study

Aggregation and Dehydration of Excavated Soft Clay and Use for Subgrade Engineering-Part 2: A Pilot-Scale Study

Design and sustainability analyses of road base layers stabilized with traditional and nontraditional additives

Dataset of mechanical properties of coarse aggregates stabilized with traditional and nontraditional additives: Stiffness, deformation, resistance to freezing and stripping

Stabilization of Quarry Fines Using a Polymeric Additive and Portland Cement

Stabilization of Loose Soils as Part of Sustainable Development of Road Infrastructure

Performance enhancement of road base material using calcium carbide residue and sulfonic acid dilution as a geopolymer stabilizer

Experimental Investigation into the Shakedown State of Unsaturated Road Base Aggregate at Various Fine Contents and Matric Suctions

Chemical stabilization of demolition wastes in pavement bases using one–part fly ash and slag based geopolymers

Mechanisms of Soil Stabilization with Liquid Ionic Stabilizer

A laboratory investigation and numerical modeling on fiber reinforced lime and alkaline binder stabilized pavement subgrade soil

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay

Mechanical properties of roads unbound treated with synthetic fluid based on isoalkane and tall oil

Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues

Feasibility of Reusing Marine Dredged Clay Stabilized by a Combination of By-Products in Coastal Road Construction

Use of secondary additives in fly ash based soil stabilization for soft subgrades

Enhanced Flexible Pavement Performance Using Treated Compared to Untreated Aggregate Bases: A Comparative Case Study in the Southern United States

Effect of Public Fillers on Cement-Stabilized Recycled Mixes of Road Performance: Mechanical Properties, Microstructure, and Durability

Behaviour of rubberised cement-bound aggregate mixtures containing different stabilisation levels under static and cyclic flexural loading

Combined effect of fiber and degree of stabilization on the early age behavior of cement bound granular mixtures