Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Using Foamed Concrete Layer to Optimize the Design of Pavement and Subgrade Structures: from the Perspectives Economy and Durability

A New Eco-Friendly Porous Asphalt Mixture Modified By Crumb Rubber And Basalt Fiber

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Structure Optimization and Numerical Analysis of Cement Concrete Overlay of Some Secondary Road Overlay

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Predicting Fatigue Damage Growth in Cement-Treated Base Layer Built with Construction and Demolition Waste

Development and Optimization of Ultimate Performance Self-Levelling Epoxy Asphalt Concrete (USEA) for Prefabricated Deck Pavement

Optimization of the dosage of chopped basalt fibers in asphalt pavement surface course materials for semi-rigid base with functional requirements

A structural design for semi-rigid base asphalt pavement based on modulus optimization

Numerical analysis on the performance of a cushioned foundation with a mixture of both rigid and flexible piles

Evaluation of the Coordination of Structural Layers in the Design of Asphalt Pavement

Design of a Novel Road Pavement Using Steel and Plastics to Enhance Performance, Durability and Construction Efficiency

Structural optimization study based on crushing of semi-rigid base

Experimental Research on Durability of Fly Ash Pavement Concrete and Mix Proportion Optimization

Pavement Structure Optimization Analysis of Basalt Fiber High Modulus Asphalt Mixture

Design and sustainability analyses of road base layers stabilized with traditional and nontraditional additives

Optimization of Sandstone Concrete Pavement Materials Based on Finite Element Method

Mechanical Properties and Optimal Mix Design of Phosphogypsum Cement Mineral Admixture Foam Light Soil

Study on the Application of Foamed Lightweight Soil in Road Widening Project: A Numerical Insight

A Feasibility Study of Low Cement Content Foamed Concrete Using High Volume of Waste Lime Mud and Fly Ash for Road Embankment

Foam Mortar Layer in Soft Subgrade Embankment: A Review