Abstract:The present study focuses on the Ud-lap grinding process and its machine-tool design aiming at ultra-precision (UP) manufacturing of advanced ceramics. Impacts of three different overlapping factors on a dressing (Ud) and three abrasive grit sizes of conventional SiC grinding wheels were analyzed on flat nanometric surface finishing of dense discs of 3Y-TZP in a ductile regime of material removal. Microhardness, contact and optical profilometry, SEM-FEG, Raman spectroscopy, XRD, and confocal epi-fluorescence were applied to characterize the ceramic material. Mechanical and electric-electronic designs of the machine-tool were developed toward the UP ceramic grinding. The design methodology was successful for supporting the achievement of all design requirements of the CNC Fiocchi Lap Grinder. The machine-tool and the Ud-lap grinding process were capable of manufacturing flat 3Y-TZP surfaces with nanometric finishing without introducing critical defects. The best finishing, Ra=60.63nm, came from the #300 grinding wheel dressed with Ud=5. A flatness deviation of 0.308μm was obtained through the #800 grinding wheel and Ud=3. Differences between theoretical and real macro and micro effects over the grinding wheels after single-point diamond dressing, epoxy bond strength, abrasive protrusion, abrasive grit size and abrasive friability play a key role in the Ud-lap grinding. There is no report of an abrasive process capable of achieving similar nanometric finishing without introducing critical defects with the same micrometric grit size and type of abrasive. The Ud-lap grinding can replace the engagement of processes such as grinding, lapping, and polishing of advanced ceramics.

Improvement of Machined Surface Flatness in Ultra-Precision Plane Honing

Development of Ultra-Precision Grinding Process for Aspheric Surface Based on Feed Rate Controlling and Error Compensation Methods

Ultraprecision finishing process integrated ELID grinding and MRF for BK glass

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Ultra-precision Single-point Grinding Technique and Profile Error Compensation Method for Machining Aspheric Mould

Nanometrology of an Ultraprecision Machined Surface by Using Optical Sensors

One-Point Nano-Grinding for Micro-Aspherical Glass Lens Mould

Optimizing the flatness of 4H-silicon carbide wafers by tuning the sequence of lapping

High-Efficiency Mirror Grinding of AlN by Ultra-Precision Plane Honing

Ultra-precision time-controlled grinding for flat mechanical parts with weak stiffness

Ultra Precision Grinding of Spherical Convex Surfaces on Combination Brittle Materials Using Resin and Metal Bond Cup Wheels

The material removal and surface generation mechanism in ultra-precision grinding of silicon wafers

Study of deterministic surface micro-texture generation in ultra-precision grinding considering wheel oscillation

Ultra-precision raster grinding of monocrystalline silicon biconical free-form optics using arc-shaped diamond grinding wheels

Influence of Kinematic Characteristics on Grinding Ultra-Precision Substrates

Optimization of Tool Path for Uniform Scallop-Height in Ultra-precision Grinding of Free-form Surfaces

Theoretical and experimental investigation into the formation mechanism of surface waviness in ultra-precision grinding

The ultra-precision Ud-lap grinding of flat advanced ceramics

Ultra-precision Machining of Hard and Brittle Materials with Coarse-Grained Grinding Wheels

Modeling on the Flatness of Silicon Wafers Ground by the Grind-polishing Wheel