Abstract:This research has demonstrated that SiO 2 impregnation under high vacuum pressure of − 90 kPa can significantly reduce porosity by almost 10%, and improve the mechanical and viscoelastic properties of spruce wood under dry and saturated states. Characterization methods, such as impact test, DMA, SEM, EDS, porosity and SAXS tests were conducted on non-treated and − 90 kPa treated spruce wood samples under dry, saturated and submerged states to analyze the synergistic effect of high vacuum SiO 2 impregnation pressure on wood properties. The results showed that high vacuum impregnation pressure had a significant positive reinforcing effect on wood's properties. It increased the impact resistance of wood under dry and saturated conditions. Additionally, the high vacuum impregnation technique was able to overcome the water-induced softening effect and caused a significant increase in the storage modulus through uniform dispersion of the SiO 2 particles in the wood's vascular structure. Consequently, the impregnation reinforced the wood and ameliorated its capacity to absorb energy. High vacuum impregnation was also able to counteract the plasticizing effect of the water molecules and significantly increased the loss modulus by increasing the internal friction and cohesion of the wood components with the addition of the nanoparticles to the vascular system, which increased the wood's capacity to transform and dissipate energy. Quantitatively and qualitatively, impregnation under a vacuum pressure of − 90 kPa exhibited an effective obstruction of the vascular structure of spruce wood. In all conditions, high vacuum-impregnated samples showed significant enhancements over non-treated samples. This research demonstrated that high vacuum SiO 2 impregnation is an effective wood processing technique. Multiple materials and applications could benefit from this research wherein high strain-rate deformations are expected to occur or when simultaneous elastic behaviour of wood and its damping energy is needed. This study could also pave the way for research on the synergistic effect of SiO 2 impregnation and water absorption on the viscoelastic behaviour of wood.

Effect of combined radio-frequency/vacuum-press drying on the strength properties of Japanese larch board

Effect of the drying condition on the strength properties of Japanese larch board after vacuum heat treatment

Study on Rheological Characteristic Applied in the Process of Hot-pressing for Particleboard

Characterization and Prediction of Mechanical and Chemical Properties of Luanta Fir Wood with Vacuum Hydrothermal Treatment

High-pressure Densification and Hydrophobic Coating for Enhancing the Mechanical Properties and Dimensional Stability of Soft Poplar Wood Boards

High-Pressure Treatment of Chinese Fir Wood: Effect on Density, Mechanical Properties, Humidity-Related Moisture Migration, and Dimensional Stability

The study of physico-mechanical properties of SiO2-impregnated wood under dry and saturated conditions

High-Pressure Treatment Effects on Density Profile, Surface Roughness, Hardness, and Abrasion Resistance of Paulownia Wood Boards

Effects of High-Pressure Treatment on Poplar Wood: Density Profile, Mechanical Properties, Strength Potential Index, and Microstructure

Effect of Steam Explosion Treatments on Drying Rates and Moisture Distributions During Radio-Frequency/vacuum Drying of Larch Pillar Combined with a Longitudinal Kerf

Prediction of stiffness and strength distributions in laminated-wood treated by high voltage electrostatic field (HVEF)

Effect of thermo-vacuum modification on selected chemical, physical, and mechanical properties of Siberian larch (Larix sibirica L.) wood

Effects of pre-steaming treatment on high-temperature and low-humidity drying characteristics of super-heavy timber with boxed-heart of Korean red pine and Douglas-fir

Effect of Growth Ring Width and Latewood Content on Selected Physical and Mechanical Properties of Plantation Japanese Larch Wood

Effects of the type of lactic acid bacteria, hot-pressing temperature, and moisture content of fermented bamboo residue on the properties of self-bonding common particleboards

Characteristic Properties of a Bamboo-Based Board Combined with Bamboo Veneers and Vacuum Heat-Treated Round Bamboo Sticks

Effects of Moisture Content on Lap-Shear, Bending, and Tensile Strength of Lap-Jointed and Finger-Jointed Southern Pine Using Phenol Resorcinol Formaldehyde and Melamine Urea Formaldehyde

Surface modification of poplar veneer by means of radio frequency oxygen plasma (RF-OP) to improve interfacial adhesion with urea-formaldehyde resin

The effect of hydroxy-methylated-resorcinol treated veneer on bonding interface and bonding strength of carbon fiber/poplar veneer composite

Lignin Inter-Diffusion Underlying Improved Mechanical Performance of Hot-Pressed Paper Webs

Effects of pressure and temperature on wood impregnation – Focusing on larch (Larix kaempferi) and Korean pine (Pinus koraiensis)