Abstract:The fabrication of polymeric micro/nanofibers is gaining attention due to their use in an array of applications including tissue engineering scaffolds, nanosensors, and fiber-reinforced composites. Despite their versatile nature, polymeric fibers are widely underutilized due to the lack of reliable, large-scale production techniques. Upon the discovery of centrifugal spinning and, recently, pressurized gyration techniques, new research directions have emerged. Here, we report a comprehensive study detailing the optimal conditions to significantly improve the morphology, homogeneity, and yield of fibers of varying diameters. A series of polymeric fibers was created using a 21 wt. % solution of polyethylene oxide in distilled water and the fluid behavior was monitored inside a transparent reservoir using a high-speed camera. Fabrication of the fibers took less than 1 s. Using centrifugal spinning, we studied the formation of the fibers at three different rotational speeds, and for pressurized gyration, one rotational speed was studied with three different nitrogen gas pressures. Using the pressurized gyration technique at a gas pressure of 0.3 MPa, there was significant improvement in the production yield of the fibers. We found a strong correlation between the variation of pressure and the rate of the solution leaving the reservoir with the improved morphology of the fibers. The use of reduced power techniques, like centrifugal spinning and pressured gyration, to yield high-quality nonwoven nanofibers and microfibers in large quantities is important due to their use in rapidly expanding markets.

Fancy-yarn Formation in Rotor Spinning by a Combination of Excess-material Feedingand Pressurized-air Injection

Continuous Micron-Scaled Rope Engineering Using a Rotating Multi-Nozzle Electrospinning Emitter

Computer Simulation of Fancy Yarns Based on Structural Model of Appearance

Simulation and experimental study of parameters in centrifugal electrospinning: Effects of rotor form on fiber formation

Research on wearing behavior of fibers in a rotor by numerical simulation and experimental verification

A Contribution to the Study of the Contraction of Rotor Yarns

A simple model for nanofiber formation by rotary jet-spinning

Rotary jet spinning review – a potential high yield future for polymer nanofibers

Effect of Air-Flow Parameters on the Morphology of Nanofibrous Yarns by Blown Bubble-Spinning

Experimental and theoretical investigation of the fluid behavior during polymeric fiber formation with and without pressure

Centrifugal spinning：A high-efficient approach to fabricate micro-/nano-fibers(Part 1)

Enhancing the Spun Yarn Properties by Controlling Fiber Stress Distribution in the Spinning Triangle with Rotary Heterogeneous Contact Surfaces

Design of collectors in centrifugal spinning: Effect on the fiber yield and morphology

Development of a new yarn supply for weft knitting machines to produce innovative knitwear

Structure and Tensile Characteristics of Rotor-Spun Composite Yarns

A rotary spinneret for high output of electrospun fibers with bimodal distribution

Fabrication Of Micro Yarn Composed Of Nanofibers By Blown Bubble Spinning

Response Surface Methodology to Explore the Influence Mechanism of Fiber Diameter in a New Multi-Needle Electrospinning Spinneret

A Comparative Study of Jet Formation in Nozzle‐ and Nozzle‐less Centrifugal Spinning Systems

Electrospinning From The Edge Of An Array Of Cascade Rotating Disks

Blending effects and performance of ring-, rotor-, and air-jet-spun color-blended viscose yarns