Abstract:Force analysis of weaving yarns. Stress‐ strain curves and fractures sections of composites with different fabric structures under tensile load. Stress‐ strain curves and fracture mechanism of composites subjected to bending loads. The component yarns and fabrics effected the formability and stability of preforms, and finally determined the performance of corresponding composites. In this research, four typical fabric structures of carbon fiber resin composites (CFRC) were introduced to conduct the comparative investigation. The stability of component yarns in natural state and in fabrics have been discussed at mesoscopic scale, and the main methods to improve the structural stability of preforms were proposed. Composites with and without stable‐structural fibers and fabrics were manufactured by the modified curing process, and the yarn cross‐sections in specimens were analyzed. The tensile and bending performance of these composite specimens was comparatively conducted to discuss the influence of stable preforms on the elastic properties. The fracture mode and mechanism of specimens were illustrated in meso‐scale. The results depicted that yarns and fabrics with stable‐structural cross‐section could ensure a high fiber volume fraction, reducing the curvature of load‐bearing yarns, and effectively reduce the yarn curvature along bearing direction. The high interfacial bonding strength of composites with stable geometrical fabrics exhibited the excellent in‐plane mechanical properties, and presented the obvious brittle fracture characteristics when the fibers fully exert their load‐bearing capacity. Highlights Stable‐structural fibers result in the prominent performance of composites. Performance of composites with stable preforms show the low dispersion. Stable cross‐section of component yarns can enhance the stability of preforms. Low curvature yarns lead to brittle fracture characteristics of composites.

Structure and Tensile Characteristics of Rotor-Spun Composite Yarns

Product Development and Process Study of Composite Yarn

Novel composite yarn with a wavy-network structure produced by various delivery speed ratios and untwisting factors

Research on wearing behavior of fibers in a rotor by numerical simulation and experimental verification

Modeling and characterization of the mechanical properties of nanofiber yarn

Role of stable‐structural yarns and fabrics on the tensile and bending performance of carbon fiber resin composites

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

Structural evolution and predictive modeling for nonlinear tensile behavior of tri-component elastic-conductive composite yarn during stretch

Viscoelastic tensile model of core/wrapped composite yarn with double filament

Investigation of the Properties of Vortex Spinning Polyester Yarn during Warp Knitting

Effect of Structural Changes on the Cotton Composite Yarn Properties

Comparative studies on the effect of fabric structure on mechanical properties of carbon fiber/epoxy composites

A novel concept to produce periodic varied structural composite yarn via cyclical changing of the spacing between filaments and the strand

Tensile properties of unidirectional thermosetting composites reinforced with ring-spun hybrid yarns including recycled carbon fiber

Study on the Tensile Behavior of Helical Auxetic Yarns with Finite Element Method

Enhancing the Spun Yarn Properties by Controlling Fiber Stress Distribution in the Spinning Triangle with Rotary Heterogeneous Contact Surfaces

Investigation into the effect of the blend ratio on the structure and properties of dual-feed-opening rotor-spun yarn

High-coverage, low-hairiness, self-reinforcing structural composite yarns based on a novel spreading apparatus in the ring machine

Study on the wear characteristics of carbon fiber yarns under the influence of multifactor coupling on braiding carriers

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM

Key Factors Limiting Carbon Nanotube Yarn Strength: Exploring Processing-Structure-Property Relationships